ESP32bot
Storby42·ESP32bot
About the ESP32bot PCB
ESP32bot is an open source ESP32 PCB design by Storby42, published on GitHub under the Custom license license. It is a 2-layer board measuring 110 × 171 mm, with 44 components from 25 distinct parts.
Its main chip is the ESP32-WROOM-32E-ESPRESSIF, from the ESP32 family. Other key parts include the BMI055, CP2102N-A01-GQFN28, L293D and 12BHC186P1-GR. By type, the board carries 10 resistors, 8 capacitors, 6 connectors, 5 ICs, 5 switches and 4 transistors.
Main components on the ESP32bot
ESP32bot bill of materials (BOM)
44 components, 25 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | BMI055 | BMI055 | IC1 |
| 1 | ESP32-WROOM-32E-ESPRESSIF ESP32-WROOM-32E-Espressif | ESP32WROOM32EM113EH3200PS3Q0 | U1 |
| 1 | CP2102N-A01-GQFN28 | QFN-28-1EP_5x5mm_P0.5mm_EP3.35x3.35mm | U2 |
| 1 | L293D | DIP-16_W7.62mm | U3 |
| 1 | 12BHC186P1-GR | 12BHC186P1GR | U4 |
| 2 | 2N7002 | SOT-23 | Q1, Q2 |
| 2 | Q_Photo_NPN | QSD124A4R0 | Q3, Q4 |
| 3 | TB002-500-02BE | TB00250002BE | J1, J2, J3 |
| 2 | 215299-4 | RHDR4W78P0X254_1X4_1026X252X850P | J4, J6 |
| 1 | SSQ-120-01-L-D | SSQ-120-XX-YYY-D | J5 |
| 1 | NaN BATT_CHG_BOOST | BATT_CHG_BOOST | B1 |
| 2 | JS202011SCQN | JS202011SCQN | S1, S2 |
| 2 | TS-1187A-B-A-B | TS1187ABAB | S3, S4 |
| 1 | DS01C-254-S-12BE | DS01C254S12BE | S5 |
| 1 | TYPE-C-31-M-12 | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | USB1 |
| 1 | LM3940IMP-3.3_NOPB | SOT230P700X180-4N | VR1 |
| 1 | L7905ACD2T-TR | TO254P1542X460-3N | VR2 |
| 2 | IRL81A | LED_D3.0mm | D1, D2 |
| 2 | 0.1UF 0.1uF | C_0603_1608Metric | C1, C2 |
| 6 | EEEFC1V331P | EEEFK1V331P | C3, C4, C5, C6, C7, C8 |
Show 5 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 5.11K 5.11k | R_0603_1608Metric | R1, R2 |
| 2 | 10K 10k | R_0603_1608Metric | R3, R4 |
| 2 | 4.7K 4.7k | R_0603_1608Metric | R5, R6 |
| 2 | 100K 100k | R_0603_1608Metric | R7, R9 |
| 2 | 300K 300k | R_0603_1608Metric | R8, R10 |
ESP32bot design files
The KiCad project lives in the Storby42/ESP32bot repository on GitHub; these links point at the commit this page was built from.
- Layoutesp32pcbbot.kicad_pcb
- Schematicesp32pcbbot.kicad_sch
- BOMesp32pcbbot.csv
ESP32bot: common questions
What microcontroller does the ESP32bot use?
The ESP32bot is built around the ESP32-WROOM-32E-ESPRESSIF, from the ESP32 family.
How big is the ESP32bot PCB?
The ESP32bot measures 110 × 171 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ESP32bot?
44 components, from 25 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the ESP32bot design files?
From the Storby42/ESP32bot repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the ESP32bot design in my own project?
It is published under Custom license, which limits how it may be reused; read the license before building on it.
Can I test firmware for the ESP32bot without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k