BBO-VCA
StudioKAT·BBO-VCA·v1.0/KiCAD/BBO&VCA_v1.0/BBO&VCA_v1.0.kicad_pcb
About the BBO-VCA PCB
BBO-VCA is an open source PCB design by StudioKAT, published on GitHub. It is a 2-layer board measuring 40.3 × 128.5 mm, with 106 components from 42 distinct parts.
Other key parts include the LM13700 and TL074. By type, the board carries 54 resistors, 19 capacitors, 9 connectors, 6 transistors, 6 diodes and 5 ICs.
It belongs with the audio designs in this gallery.
From the project
BBO&VCA は、Ieaskul F. Mobenthey の Denum と crucFX Utility BBO にインスパイアされた「バウンズ・バウンス・オシレーター(Bounds Bounce Oscillator)」です。 この回路は、「バウンス(Bounce)」と「バウンズ(Bounds)」という、2つの概念を軸に動作します。 ボールが2つの壁の間を行き来して跳ねている様子をイメージしてください。バウンスはボールのスピード、バウンズはその2つの壁の距離です。 このオシレーターでは、バウンスを大きくすると周波数が上がり、バウンズを狭めると振幅
BBO&VCA は、Ieaskul F. Mobenthey の Denum と crucFX Utility BBO にインスパイアされた「バウンズ・バウンス・オシレーター(Bounds Bounce Oscillator)」です。 この回路は、「バウンス(Bounce)」と「バウンズ(Bounds)」という、2つの概念を軸に動作します。 ボールが2つの壁の間を行き来して跳ねている様子をイメージしてください。バウンスはボールのスピード、バウンズはその2つの壁の距離です。 このオシレーターでは、バウンスを大きくすると周波数が上がり、バウンズを狭めると振幅が下がる代わりに周波数はさらに上がります。つまり、壁を近づけると、ボール(信号)の移動が速くなるという構造です。 BBO&VCA は、バウンスとバウンズをそれぞれ独立して調整・変調でき、主出力からは常に三角波が出力されます。また、もう1つの出力からは矩形波が得られます。 さらに、レンジスイッチにより3つの動作範囲を選択できます: - 標準オーディオレート - 低オーディオレート - LFOレート

Main components on the BBO-VCA
BBO-VCA bill of materials (BOM)
106 components, 42 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | LM13700 | SOIC-16_3.9x9.9mm_P1.27mm | U1, U2 |
| 3 | TL074 | SOIC-14_3.9x8.7mm_P1.27mm | U3, U4, U5 |
| 4 | BCM857BS | SOT-363_SC-70-6 | Q1, Q2, Q3, Q4 |
| 2 | MMBT3906 | SOT-23 | Q5, Q6 |
| 1 | POWER | BoxHeader_2x05_2.54mm_Europower_2 | J1 |
| 1 | Bounce_Lin | AudioJack_PJ301M-12 | J2 |
| 1 | Bounce_CV | AudioJack_PJ301M-12 | J3 |
| 1 | Bounds_Lin | AudioJack_PJ301M-12 | J4 |
| 1 | Bounds_CV | AudioJack_PJ301M-12 | J5 |
| 1 | VCA_CV_Triangle | AudioJack_PJ301M-12 | J6 |
| 1 | VCA_CV_Square | AudioJack_PJ301M-12 | J7 |
| 1 | Triangle_OUT | AudioJack_PJ301M-12 | J8 |
| 1 | Square_OUT | AudioJack_PJ301M-12 | J9 |
| 4 | B50K | Potentiometer_RV09 | RV1, RV2, RV3, RV4 |
| 2 | B100K | Potentiometer_RV09 | RV5, RV6 |
| 1 | SW_SPDT_MSM | ToggleSwitch_2MS1-T2-B4-M2-Q-E-S | SW1 |
| 2 | 1N5819WS | D_SOD-323 | D1, D2 |
| 2 | 1N4148WS | D_SOD-323 | D3, D4 |
| 2 | LED_Dual_Bidirectional | LED_D3.0mm | D5, D6 |
| 2 | 22UF 22uF | C_0805_2012Metric | C1, C2 |
Show 22 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 10 | 100NF 100nF | C_0603_1608Metric | C3, C4, C5, C6, C7, C8, C9, C10 +2 |
| 1 | 1NF 1nF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C13 |
| 1 | 1UF 1uF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C14 |
| 1 | 47NF 47nF | C_1913_4833Metric | C15 |
| 2 | 330PF 330pF | C_0402_1005Metric | C16, C17 |
| 2 | 47PF 47pF | C_0402_1005Metric | C18, C19 |
| 4 | 10M | R_0402_1005Metric | R1, R2, R3, R4 |
| 4 | 22K | R_0402_1005Metric | R5, R7, R27, R28 |
| 6 | 100K | R_0402_1005Metric | R6, R8, R9, R10, R19, R21 |
| 9 | 10K | R_0402_1005Metric | R11, R12, R20, R22, R26, R29, R30, R49 +1 |
| 6 | 4.7K | R_0402_1005Metric | R13, R14, R15, R16, R51, R53 |
| 4 | 47K | R_0402_1005Metric | R17, R18, R24, R25 |
| 1 | 470K | R_0402_1005Metric | R23 |
| 2 | 15K | R_0603_1608Metric | R31, R32 |
| 2 | 330K | R_0402_1005Metric | R33, R34 |
| 2 | 33K | R_0402_1005Metric | R35, R36 |
| 2 | 6.8K | R_0402_1005Metric | R37, R38 |
| 4 | 1K | R_0402_1005Metric | R39, R40, R52, R54 |
| 1 | 240K | R_0603_1608Metric | R41 |
| 1 | 360K | R_0603_1608Metric | R42 |
| 4 | 680R | R_0402_1005Metric | R43, R44, R45, R46 |
| 2 | 18K | R_0402_1005Metric | R47, R48 |
BBO-VCA design files
The KiCad project lives in the StudioKAT/BBO-VCA repository on GitHub; these links point at the commit this page was built from.
BBO-VCA: common questions
How big is the BBO-VCA PCB?
The BBO-VCA measures 40.3 × 128.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the BBO-VCA?
106 components, from 42 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the BBO-VCA design files?
From the StudioKAT/BBO-VCA repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the BBO-VCA design in my own project?
The repository has no license, so all rights stay with StudioKAT. Use it as a reference, and ask the author before reusing the design.
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687