109 open source boards using the LM13700
Real designs built with the LM13700, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
VCO
nickajeglin
37 × 113.9 mm104 parts2LNo license208MFOS Eight Stage Phase Shifter - Main
mzuelch
27.9 × 101.6 mm104 parts2LMIT166NXP
OverCycler 3 board
gligli
233.7 × 172.2 mm331 parts2LGPL-3.045AVR/Arduino
Foundation
odeliy
48 × 110 mm123 parts2LNo license37258D
DunningtonAudio
104 × 158 mm219 parts2LGPL-3.031Amp
rabidaudio
59 × 110 mm111 parts2LMIT31281D
DunningtonAudio
104 × 158 mm370 parts4LGPL-3.024Synbal
Bad-Dog-Designs
71 × 108 mm105 parts2LGPL-2.014Wasp 0.3
zero-emission
65 × 85 mm57 parts2LNo license14MFOSmod
Micosilent
50 × 100 mm102 parts2LCC-BY-NC-4.013STM32
Cats eye
lennartquerter
90 × 110 mm223 parts4LCC-BY-NC-4.012VCEQ
banjomasterpete
40 × 128.5 mm112 parts2LNo license12Haible tau phaser plug in board
JordanAceto
58.4 × 50.8 mm139 parts2LCC-BY-4.011Skis
kraakenstuff
29.2 × 109.2 mm96 parts2LNo license11810
minisystem
148 × 110 mm327 parts2LNo license10VCO
VincentPeters
37 × 113.9 mm104 parts2LNo license9STM32
Liv Synth
SloBloLabs
230 × 159.9 mm273 parts2LMIT7KOSMO Roundhouse
sebastianbeyer
75 × 200 mm149 parts2LNo license7Pedal snow white autowah single
dvhx
60.8 × 116.5 mm112 parts2LGPL-3.07State Variable Filter
xdylanm
38.5 × 100 mm74 parts4LMIT6RP2040/RP2350
Iosefka motherboard
GlobalSequence
213 × 128.5 mm122 parts2LNo license5BBO-VCA
StudioKAT
40.3 × 128.5 mm106 parts2LNo license4Analog board
minisystem
200 × 150 mm500 parts2LNo license3KOSMOS LFO6
DavesKosmoModules
96.1 × 115 mm105 parts2LCC0-1.03AnalogDrum Metal
LazareLive
100.3 × 160 mm172 parts2LNo license2Briefcase synth
gridbugs
88.2 × 124.5 mm33 parts2LNo license2Twangilizer
shannon-greenlight
101.3 × 110 mm454 parts4LNo license1Voice
minisystem
133.4 × 50 mm426 parts2LNo license1PIC
SynthBoard Left Rotary
wakimizufu
257 × 90.2 mm229 parts2LNo license1State-Space-Computer
aether-machine
96.8 × 111.8 mm104 parts4LCC-BY-NC-4.01OctaveEnv
hsetlik
100 × 65 mm82 parts4LNo license1- schematic only · 140 parts
Synth32
markeby
140 partsNo license1 RP2040/RP2350
MainBorad R1
wakimizufu
200 × 130.3 mm258 parts2LNo license0Vca mix
sgreene30
70.1 × 105.9 mm190 parts2LNo license0Main
yminp
148.6 × 82 mm156 parts2LCERN-OHL-W-2.00Untitled
v1peridae
74.4 × 85.1 mm117 parts4LNo license0
How designs wire the LM13700
Read from the KiCad layouts of 57 open source designs, one per repository: what each pin of the LM13700 connects to, and the resistors, capacitors and other passives placed on it.
- The VOUTA pin has a series resistor on 40 of 57 designs, most often 10 kΩ (then 4.7 kΩ).
- The DIODE_BIAS pins is left unconnected on 84% of them (a signal on 17).
- The - pins have a series resistor on 39 of 57 designs, most often 10 kΩ (then 100 kΩ).
- The + pins have a resistor to GND on 37 of 57 designs, most often 220 Ω (then 470 Ω).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VOUTApin 1 | Connected to: Signal 96% |
|
| DIODE_BIASpin 2, 15 | Connected to: Not connected 84% · a signal 15% | — |
| +pin 3, 14 | Connected to: Signal 86% |
|
| -pin 4, 13 | Connected to: Signal 80% · GND 15% |
|
| VREFLpin 5 | Connected to: TL074 26% |
|
| V-pin 6 | Connected to: -12V 77% · GND 16% |
|
| V+pin 11 | Connected to: 12V 91% |
|
| IOVDDpin 12 | Connected to: TL074 27% |
|
| LDACpin 16 | Connected to: Signal 95% |
|
4 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Vca by nickajeglin, Dual VCA #2 Main by mzuelch, OverCycler 3 board by gligli and Foundation by odeliy.
The LM13700 in open source designs
The gallery holds 109 open source boards using the LM13700 from 58 GitHub repositories; a typical one measures about 69 × 102.5 mm and carries around 94 components.
88% are two-layer designs, the rest use four layers or more, and 35% carry an open source license.
The most starred is VCO by nickajeglin.
Parts used alongside the LM13700
Microcontrollers on boards using the LM13700
What boards using the LM13700 are built for
LM13700: common questions
Where can I find a LM13700 reference design?
Each of the 109 boards on this page is a real design using the LM13700. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the LM13700 VOUTA pin?
The VOUTA pin has a series resistor on 40 of 57 designs, most often 10 kΩ (then 4.7 kΩ). Counted from the KiCad layouts of 57 open source designs using the LM13700.
How is the LM13700 DIODE_BIAS pin connected?
The DIODE_BIAS pins is left unconnected on 84% of them (a signal on 17). Counted from the KiCad layouts of 57 open source designs using the LM13700.
What resistor goes on the LM13700 - pin?
The - pins have a series resistor on 39 of 57 designs, most often 10 kΩ (then 100 kΩ). Counted from the KiCad layouts of 57 open source designs using the LM13700.
What parts are used alongside the LM13700?
The TL074, TL072, TL071, OP275 and TL084 appear in the most repositories here.
Which microcontrollers do boards using the LM13700 use?
Most are built on STM32 (6), AVR/Arduino (3), RP2040/RP2350 (2) and PIC (2).
How big is a typical board using the LM13700?
The median is 69 × 102.5 mm, and 88% are two-layer designs.
What is the most popular open source board using the LM13700?
By GitHub stars, VCO by nickajeglin, with 208 stars.
Can I simulate one of these boards using the LM13700 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.