KiCAD

sudo-apt-install-tap·ErgoSplit·KiCAD/KiCAD.kicad_pcb

KiCAD PCB layout, top view — open source Nordic nRF board by sudo-apt-install-tap

About the KiCAD PCB

KiCAD is an open source Nordic nRF PCB design by sudo-apt-install-tap, published on GitHub. It is a 2-layer board measuring 207.5 × 100.9 mm, with 74 components from 3 distinct parts.

Its main chip is the XIAO-nRF52840-SMD, from the Nordic nRF family. By type, the board carries 36 switches, 36 diodes and 2 ICs.

It belongs with the keyboards and iot & wireless designs in this gallery.

From the project

A ergonomical splitkbd!

A split keyboard with a minimalist low profile design!! Symmetrical for easy printing.

Name | Quantity | Price ( 1 UNIT) | Price Total | Runing Total | Link -------|-------|-------|-------|-------|------- MCU | 2 | ₹1,160.00 | ₹2,320.00 | ₹2,320.00 | https://robu.in/product/seeed-studio-xiao-ble-nrf52840/ DIODES | 40 | ₹1.05 | ₹42.00 | ₹2,362.00 | https://robu.in/product/mm1z27-slkor-sod-123-zener-diodes-rohs/ Hotswap Socket (Pack of 10) | 4 | 145 | ₹580.00 | ₹2,942.00 | https://neomacro.in/products/kailh-choc-pg1350-hot-swap-sockets?variant=48049369907478 Kailh Choc V1 (Pack of 10) | 4 |…

KiCAD, from the project README
From the project README

Main components on the KiCAD

KiCAD bill of materials (BOM)

74 components, 3 distinct parts — part numbers from the project's BOM.

QtyPartRefs
2
XIAO-nRF52840-SMD
U1, U3
36
SW_Push_45deg
SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +28
36
D
D1, D2, D3, D4, D5, D6, D7, D8 +28

KiCAD design files

The KiCad project lives in the sudo-apt-install-tap/ErgoSplit repository on GitHub; these links point at the commit this page was built from.

KiCAD: common questions

What microcontroller does the KiCAD use?

The KiCAD is built around the XIAO-nRF52840-SMD, from the Nordic nRF family.

How big is the KiCAD PCB?

The KiCAD measures 207.5 × 100.9 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the KiCAD?

74 components, from 3 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the KiCAD design files?

From the sudo-apt-install-tap/ErgoSplit repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the KiCAD design in my own project?

The repository has no license, so all rights stay with sudo-apt-install-tap. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the KiCAD without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Nordic nRF firmware against it before you order a PCB.

More boards in ErgoSplit

Similar boards