Right
sudo-apt-install-tap·ErgoSplit·KiCAD/Halfs/Right/Right.kicad_pcb
About the Right PCB
Right is an open source Nordic nRF PCB design by sudo-apt-install-tap, published on GitHub. It is a 2-layer board measuring 103 × 100.9 mm, with 37 components from 3 distinct parts.
Its main chip is the XIAO-nRF52840-SMD, from the Nordic nRF family. By type, the board carries 18 switches, 18 diodes and 1 IC.
It belongs with the keyboards and iot & wireless designs in this gallery.
From the project
A ergonomical splitkbd!
A split keyboard with a minimalist low profile design!! Symmetrical for easy printing.
Name | Quantity | Price ( 1 UNIT) | Price Total | Runing Total | Link -------|-------|-------|-------|-------|------- MCU | 2 | ₹1,160.00 | ₹2,320.00 | ₹2,320.00 | https://robu.in/product/seeed-studio-xiao-ble-nrf52840/ DIODES | 40 | ₹1.05 | ₹42.00 | ₹2,362.00 | https://robu.in/product/mm1z27-slkor-sod-123-zener-diodes-rohs/ Hotswap Socket (Pack of 10) | 4 | 145 | ₹580.00 | ₹2,942.00 | https://neomacro.in/products/kailh-choc-pg1350-hot-swap-sockets?variant=48049369907478 Kailh Choc V1 (Pack of 10) | 4 |…

Main components on the Right
Right bill of materials (BOM)
37 components, 3 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XIAO-nRF52840-SMD | XIAO-nRF52840-SMD | U1 |
| 18 | SW_Push_45deg | SW_Hotswap_Kailh_Choc_V1 | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +10 |
| 18 | D | D_SOD-123 | D1, D2, D3, D4, D5, D6, D7, D8 +10 |
Right design files
The KiCad project lives in the sudo-apt-install-tap/ErgoSplit repository on GitHub; these links point at the commit this page was built from.
Right: common questions
What microcontroller does the Right use?
The Right is built around the XIAO-nRF52840-SMD, from the Nordic nRF family.
How big is the Right PCB?
The Right measures 103 × 100.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Right?
37 components, from 3 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Right design files?
From the sudo-apt-install-tap/ErgoSplit repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Right design in my own project?
The repository has no license, so all rights stay with sudo-apt-install-tap. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Right without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Nordic nRF firmware against it before you order a PCB.
More boards in ErgoSplit
Similar boards
Nordic nRF
Keyboard
byrantech
262.5 × 109.6 mm206 parts2LMIT4.3kNordic nRF
TOTEM
GEIGEIGEIST
258.8 × 94.4 mm85 parts2LCERN-OHL-P-2.02.0kNordic nRF
Pixl.js
solosky
40 × 23 mm45 parts4LGPL-2.01.4kNordic nRF
Management
dennisss
101 × 31.5 mm50 parts2LApache-2.0381Nordic nRF
Board hl15-latest
dennisss
61 × 37 mm14 parts2LApache-2.0381Nordic nRF
Board
dennisss
363 × 128 mm420 parts4LApache-2.0381