Pico Baseboard
sudo-junkie·Pico_Baseboard·SRC/Pico_Baseboard.kicad_pcb
About the Pico Baseboard PCB
Pico Baseboard is an open source RP2040/RP2350 PCB design by sudo-junkie, published on GitHub under the GPL-2.0 license. It is a 2-layer board measuring 57.2 × 59.7 mm, with 31 components from 20 distinct parts.
Its main chip is the PICO, from the RP2040/RP2350 family. Other key parts include the AP63205WU-7 and ADS1115IDGSR. By type, the board carries 12 capacitors, 9 connectors, 3 ICs, 3 resistors, 2 inductors and 1 switch.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
A Raspberry Pi Pico carrier board with 4 analog inputs and 4 digital I/O
KiCad 7 design files (schematic, PCB, BOM, gerbers) for a Raspberry Pi Pico carrier board with 4 analog inputs and 4 digital I/O

Main components on the Pico Baseboard
Pico Baseboard bill of materials (BOM)
31 components, 20 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AP63205WU-7 AP63205WU | TSOT-23-6 | U201 |
| 1 | PICO RaspberryPi Pico | RaspberryPi Pico | U301 |
| 1 | ADS1115IDGSR ADS1115IDGS | TSSOP-10_3x3mm_P0.5mm | U302 |
| 1 | HC-DC-005-2.0T Barrel_Jack | BarrelJack_Horizontal | J101 |
| 1 | C68305 Conn_WATER1 | TerminalBlock_Phoenix_MPT-0,5-3-2.54_1x03_P2.54mm_Horizontal | J102 |
| 1 | C68305 Conn_WATER2 | TerminalBlock_Phoenix_MPT-0,5-3-2.54_1x03_P2.54mm_Horizontal | J103 |
| 1 | C68305 Conn_WATER3 | TerminalBlock_Phoenix_MPT-0,5-3-2.54_1x03_P2.54mm_Horizontal | J104 |
| 1 | C68305 Conn_WATER4 | TerminalBlock_Phoenix_MPT-0,5-3-2.54_1x03_P2.54mm_Horizontal | J105 |
| 1 | C68305 Conn_AUX1 | TerminalBlock_Phoenix_MPT-0,5-3-2.54_1x03_P2.54mm_Horizontal | J106 |
| 1 | C68305 Conn_AUX2 | TerminalBlock_Phoenix_MPT-0,5-3-2.54_1x03_P2.54mm_Horizontal | J107 |
| 1 | C68305 Conn_AUX3 | TerminalBlock_Phoenix_MPT-0,5-3-2.54_1x03_P2.54mm_Horizontal | J108 |
| 1 | C68305 Conn_AUX4 | TerminalBlock_Phoenix_MPT-0,5-3-2.54_1x03_P2.54mm_Horizontal | J109 |
| 1 | TD-1183SN-1.5H-250 SW_RESET | SW_SPST_B3U-1000P | SW301 |
| 1 | 3DSR1M SS34 | D_SOD-323 | D101 |
| 1 | BLM15PG100SN1D 220R@100MHz | L_0402_1005Metric | FB301 |
| 1 | CXP0420-4R7M-AG(4.7uh) 4.7u | L_Sunlord_MWSA0402S | L201 |
| 5 | GRM188R61E106KA73D 10u | C_0402_1005Metric | C201, C204, C205, C303, C304 |
| 4 | CL03A104KO3NNNC 100n | C_0402_1005Metric | C202, C203, C301, C302 |
| 3 | CL05A105KO5NNNC 1u | C_0402_1005Metric | C305, C306, C307 |
| 3 | RC0402FR-0710KL 10K | R_0402_1005Metric | R301, R302, R303 |
Pico Baseboard design files
The KiCad project lives in the sudo-junkie/Pico_Baseboard repository on GitHub; these links point at the commit this page was built from.
- LayoutSRC/Pico_Baseboard.kicad_pcb
- SchematicSRC/Pico_Baseboard.kicad_sch
Pico Baseboard: common questions
What microcontroller does the Pico Baseboard use?
The Pico Baseboard is built around the PICO, from the RP2040/RP2350 family.
How big is the Pico Baseboard PCB?
The Pico Baseboard measures 57.2 × 59.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Pico Baseboard?
31 components, from 20 distinct parts. The full bill of materials is listed on this page.
Where can I download the Pico Baseboard design files?
From the sudo-junkie/Pico_Baseboard repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Pico Baseboard design in my own project?
Yes, under the terms of its GPL-2.0 license, which sudo-junkie chose for the repository.
Can I test firmware for the Pico Baseboard without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k