SB-Devboard
suhaan2485·SB-Devboard·KiCad Files/Devboard.kicad_pcb
About the SB-Devboard PCB
SB-Devboard is an open source RP2040/RP2350 PCB design by suhaan2485, published on GitHub. It is a 2-layer board measuring 30.8 × 55 mm, with 33 components from 16 distinct parts.
Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the W25Q128JVS and NCP1117-3.3_SOT223. By type, the board carries 17 capacitors, 7 resistors, 4 connectors, 3 ICs, 1 crystal and 1 switch.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
This is just an Simple ahh Devboard
An Simple RP2040 microcontroller devboard with USB-C and soldered headers for easier usage!
I have followed the Build-A-Devboard Guide by @KaiPereira on HackClub Macondo (https://macondo.hackclub.com/docs/build-a-devboard)
This project uses pre assebmled PCBs if u want to build on your own the mentioned guide should be enough.
Parts BOM Exported from KiCad (Table): | Id | Designator | Footprint | Quantity | Comment | Supplier and ref | |----------|----------|----------|----------|----------|----------| | 1 | C1, C6 | C04021005Metric | 2 | 1uF | | | 2 | C2, C5, C7, C8, C9, C10, C11, C12…
Main components on the SB-Devboard
SB-Devboard bill of materials (BOM)
33 components, 16 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RP2040 | QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U1 |
| 1 | W25Q128JVS | SOIC-8_5.3x5.3mm_P1.27mm | U2 |
| 1 | NCP1117-3.3_SOT223 | SOT-223-3_TabPin2 | U3 |
| 1 | 12MHZ 12MHz | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | USB_C_RECEPTACLE_USB2.0_14P USB_C_Receptacle_USB2.0_14P | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 2 | CONN_01X20 Conn_01x20 | PinHeader_1x20_P2.54mm_Vertical | J2, J4 |
| 1 | CONN_01X03 Conn_01x03 | PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | SW_Push | SW_Push_SPST_NO_Alps_SKRK | SW1 |
| 2 | 1UF 1uF | C_0402_1005Metric | C1, C6 |
| 11 | 0.1UF 0.1uF | C_0402_1005Metric | C2, C5, C7, C8, C9, C10, C11, C12 +3 |
| 2 | 33PF 33pF | C_0402_1005Metric | C3, C4 |
| 2 | 10UF 10uF | C_0603_1608Metric | C16, C17 |
| 2 | 27.4 | R_0402_1005Metric | R1, R2 |
| 2 | 1K | R_0402_1005Metric | R3, R4 |
| 1 | 10K 10k | R_0402_1005Metric | R5 |
| 2 | 5.1K | R_0402_1005Metric | R6, R7 |
SB-Devboard design files
The KiCad project lives in the suhaan2485/SB-Devboard repository on GitHub; these links point at the commit this page was built from.
SB-Devboard: common questions
What microcontroller does the SB-Devboard use?
The SB-Devboard is built around the RP2040, from the RP2040/RP2350 family.
How big is the SB-Devboard PCB?
The SB-Devboard measures 30.8 × 55 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the SB-Devboard?
33 components, from 16 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the SB-Devboard design files?
From the suhaan2485/SB-Devboard repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the SB-Devboard design in my own project?
The repository has no license, so all rights stay with suhaan2485. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the SB-Devboard without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k