ESP32-WROOM-32E-development board
sukeshraom·ESP32-WROOM-32E-development-board
About the ESP32-WROOM-32E-development board
ESP32-WROOM-32E-development board is an open source ESP32 PCB design by sukeshraom, published on GitHub. It is a 2-layer board measuring 58.3 × 46.2 mm, with 31 components from 14 distinct parts.
Its main chip is the ESP32-WROOM-32E, from the ESP32 family. Other key parts include the AMS1117-3.3. By type, the board carries 10 resistors, 7 capacitors, 4 diodes, 3 connectors, 2 ICs and 2 transistors.
It belongs with the dev boards & breakouts, iot & wireless and usb & debug tools designs in this gallery.
From the project
ESP32-WROOM-32E development board in the Arduino UNO form factor with USB Type-C and CH340C USB-to-UART interface. Includes complete KiCad schematic, PCB layout, and manufacturing files. Designed for IoT, embedded systems, rapid prototyping, and Arduino shield compatibility.
A compact ESP32-WROOM-32E Development Board designed in the Arduino UNO form factor with a USB Type-C interface and CH340C USB-to-UART converter. The board combines the versatility of the ESP32 with the familiar Arduino UNO header layout, making it suitable for rapid prototyping and shield-based development.
- ESP32-WROOM-32E module - Arduino UNO compatible form factor - USB Type-C connector for power and programming - CH340C USB-to-UART interface - Auto Reset and Auto Boot circuitry - 3.3 V regulated power supply - Power and User LEDs - Standard UNO header layout - Breakout access to ESP32…
Main components on the ESP32-WROOM-32E-development board
ESP32-WROOM-32E-development board bill of materials (BOM)
31 components, 14 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U1 |
| 1 | ESP32-WROOM-32E | ESP32-WROOM-32D | U2 |
| 2 | SS8050 | SOT-23 | Q1, Q2 |
| 1 | USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_GCT_USB4110 | J1 |
| 2 | Conn_01x04_Pin | JST_EH_B4B-EH-A_1x04_P2.50mm_Vertical | J2, J3 |
| 1 | SW_SPST | SW_Tactile_SPST_NO_Straight_CK_PTS636Sx25SMTRLFS | SW1 |
| 1 | CH340C | SOIC-16_3.9x9.9mm_P1.27mm | ch1 |
| 1 | D_Schottky | D_SOD-123 | s1 |
| 4 | LED | LED_0805_2012Metric | D1, D2, D3, D4 |
| 2 | 47uF | CP_Elec_5x4.4 | C1, C2 |
| 5 | 0.1uF | C_0805_2012Metric | C3, C4, C5, C6, C7 |
| 4 | 10Kohm | R_0805_2012Metric | R1, R2, R3, R4 |
| 4 | 330ohm | R_0805_2012Metric | R5, R6, R7, R8 |
| 2 | 12Kohm | R_0805_2012Metric | R9, R10 |
ESP32-WROOM-32E-development board design files
The KiCad project lives in the sukeshraom/ESP32-WROOM-32E-development-board repository on GitHub; these links point at the commit this page was built from.
- Layoutesp32-module-3.0.kicad_pcb
- Schematicesp32-module-3.0.kicad_sch
ESP32-WROOM-32E-development board: common questions
What microcontroller does the ESP32-WROOM-32E-development board use?
The ESP32-WROOM-32E-development board is built around the ESP32-WROOM-32E, from the ESP32 family.
How big is the ESP32-WROOM-32E-development board?
The ESP32-WROOM-32E-development board measures 58.3 × 46.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ESP32-WROOM-32E-development board?
31 components, from 14 distinct parts. The full bill of materials is listed on this page.
Where can I download the ESP32-WROOM-32E-development board design files?
From the sukeshraom/ESP32-WROOM-32E-development-board repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the ESP32-WROOM-32E-development board design in my own project?
The repository has no license, so all rights stay with sukeshraom. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the ESP32-WROOM-32E-development board without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k