Honyone RGB Shield
About the Honyone RGB Shield
Honyone RGB Shield is an open source PCB design by sullyjason, published on GitHub. It is a 2-layer board measuring 41.9 × 39.4 mm, with 6 components from 6 distinct parts.
By type, the board carries 4 switches and 2 connectors.
It belongs with the displays & leds, dev boards & breakouts and iot & wireless designs in this gallery.
From the project
Interactive LED button grids that connect two locations over MQTT — press a button in one place, see it light up in the other. ESP32 + NeoPixel switch hardware, KiCad designs, and firmware.
Breakout board for the Honyone RGB switches in the 2x2 Interactile. Routes switch contacts and WS2811 LED data lines to a connector.
Honyone RGB Shield bill of materials (BOM)
6 components, 6 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PINHD_1X4_MALE PINHD_1x4_Male | PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | PINHD_1X13_MALE PINHD_1x13_Male | PinHeader_1x13_P2.54mm_Vertical | J2 |
| 1 | RGB_SW_1 | Honyone Tactile Switch RGB | SW1 |
| 1 | RGB_SW_2 | Honyone Tactile Switch RGB | SW2 |
| 1 | RGB_SW_3 | Honyone Tactile Switch RGB | SW3 |
| 1 | RGB_SW_4 | Honyone Tactile Switch RGB | SW4 |
Honyone RGB Shield design files
The KiCad project lives in the sullyjason/interactiles repository on GitHub; these links point at the commit this page was built from.
Honyone RGB Shield: common questions
How big is the Honyone RGB Shield?
The Honyone RGB Shield measures 41.9 × 39.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Honyone RGB Shield?
6 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Honyone RGB Shield design files?
From the sullyjason/interactiles repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Honyone RGB Shield design in my own project?
The repository has no license, so all rights stay with sullyjason. Use it as a reference, and ask the author before reusing the design.
More boards in interactiles
Solo Mini Controller
38 × 45.3 mm35 parts4LNo license1
RGB 2x2 with WS2811
41.9 × 59.7 mm27 parts2LNo license1
ESP324x Mini Controller
76.4 × 111.6 mm26 parts2LNo license1
ESP32Interactiles Controller
62.5 × 103.3 mm25 parts2LNo license1
Mini Module
38 × 33.2 mm25 parts4LNo license1
Interactiles Module Neopixel
134.8 × 82.4 mm22 parts2LNo license1
ESP324x Mini Controller Wired
76.4 × 90.8 mm21 parts2LNo license1
Module Large IOexpander
39.6 × 36.4 mm8 parts2LNo license1
Similar boards
View screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2k
BM28B0.6-24DSBreakout
15.2 × 35.6 mm3 parts2LApache-2.022.2k
LevelShifterBreakout
15.2 × 20.3 mm5 parts2LApache-2.022.2k
View base
81.2 × 81.2 mm81 parts2LApache-2.022.2k
ChainlinkDriverTester
198.1 × 95.3 mm123 parts2LApache-2.04.2k
ChainlinkBase
98.4 × 190.5 mm119 parts2LApache-2.04.2k