Iot classroom
supsenpaii·iot-classroom·hardware/kicad/IOT.kicad_pcb
About the Iot classroom PCB
Iot classroom is an open source ESP32 PCB design by supsenpaii, published on GitHub. It is a 2-layer board measuring 50 × 80 mm, with 53 components from 39 distinct parts.
Its main chip is the ESP32-C3-MINI-1-N4, from the ESP32 family. Other key parts include the AMS1117-3.3 and USBLC6-2SC6. By type, the board carries 16 switches, 16 resistors, 10 capacitors, 4 diodes, 3 ICs and 3 connectors.
It belongs with the iot & wireless and usb & debug tools designs in this gallery.
From the project
Website lớp học tương tác: React, Express, SQLite và giao thức WebSocket kết nối ESP32. Chưa kèm firmware.
Giáo viên chiếu câu hỏi, học sinh bấm đáp án trên thiết bị ESP32-C3. Đáp án đi qua Wi-Fi/WebSocket, được lưu vào SQLite rồi máy chủ mới trả ACK, nên kết quả hiện lên web ngay lập tức.
1. Kiến trúc hệ thống 2. Phần cứng - Linh kiện - Sơ đồ nguyên lý - Mạch in PCB - Mô hình 3D - Gán chân - File thiết kế 3. Firmware ESP32 4. Phần mềm Web 5. Giao thức & độ tin cậy 6. Cài đặt & chạy

Main components on the Iot classroom
Iot classroom bill of materials (BOM)
53 components, 39 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-C3-MINI-1-N4 | ESP32-C3-MINI-1-N4 | U1 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U2 |
| 1 | USBLC6-2SC6 | SOT-23-6 | U3 |
| 1 | AO3401A | SOT-23 | Q1 |
| 1 | BATTERY 4xAAA | PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | USB-C 16P | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J2 |
| 1 | OLED 0.91 I2C | PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | MSS-22D18G2 | SW_DPDT_MSS-22D18G2 | SW1 |
| 1 | RESET | SW_SPST_3x4mm_2P | SW2 |
| 1 | KEY_0 | SW_SPST_PTS645Sx43SMTR92 | SW3 |
| 1 | BOOT | SW_SPST_3x4mm_2P | SW4 |
| 1 | KEY_7 | SW_SPST_PTS645Sx43SMTR92 | SW5 |
| 1 | KEY_8 | SW_SPST_PTS645Sx43SMTR92 | SW6 |
| 1 | KEY_9 | SW_SPST_PTS645Sx43SMTR92 | SW7 |
| 1 | KEY_4 | SW_SPST_PTS645Sx43SMTR92 | SW8 |
| 1 | KEY_5 | SW_SPST_PTS645Sx43SMTR92 | SW9 |
| 1 | KEY_6 | SW_SPST_PTS645Sx43SMTR92 | SW10 |
| 1 | KEY_1 | SW_SPST_PTS645Sx43SMTR92 | SW11 |
| 1 | KEY_2 | SW_SPST_PTS645Sx43SMTR92 | SW12 |
| 1 | KEY_3 | SW_SPST_PTS645Sx43SMTR92 | SW13 |
Show 19 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | KEY_OK | SW_SPST_PTS645Sx43SMTR92 | SW14 |
| 1 | KEY_MODE | SW_SPST_PTS645Sx43SMTR92 | SW15 |
| 1 | KEY_DEL | SW_SPST_PTS645Sx43SMTR92 | SW16 |
| 1 | SS14 | D_SMA | D1 |
| 1 | PWR (red) | LED_0805_2012Metric | D2 |
| 1 | STATUS (green) | LED_0805_2012Metric | D3 |
| 1 | USB (blue) | LED_0805_2012Metric | D4 |
| 2 | 10UF 10uF | C_0805_2012Metric | C1, C5 |
| 1 | 22uF Ta | CP_EIA-3528-21_Kemet-B | C2 |
| 5 | 100NF 100nF | C_0805_2012Metric | C3, C6, C8, C9, C10 |
| 1 | 4.7UF 4.7uF | C_0805_2012Metric | C4 |
| 1 | 1UF 1uF | C_0805_2012Metric | C7 |
| 2 | 100K 100k | R_0805_2012Metric | R1, R15 |
| 3 | 1k | R_0805_2012Metric | R2, R10, R16 |
| 2 | 5.1K 5.1k | R_0805_2012Metric | R3, R4 |
| 2 | 22R | R_0805_2012Metric | R5, R6 |
| 4 | 10K 10k | R_0805_2012Metric | R7, R8, R11, R17 |
| 2 | 4.7K 4.7k | R_0805_2012Metric | R12, R13 |
| 1 | 200K 200k | R_0805_2012Metric | R14 |
Iot classroom design files
The KiCad project lives in the supsenpaii/iot-classroom repository on GitHub; these links point at the commit this page was built from.
Iot classroom: common questions
What microcontroller does the Iot classroom use?
The Iot classroom is built around the ESP32-C3-MINI-1-N4, from the ESP32 family.
How big is the Iot classroom PCB?
The Iot classroom measures 50 × 80 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Iot classroom?
53 components, from 39 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Iot classroom design files?
From the supsenpaii/iot-classroom repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Iot classroom design in my own project?
The repository has no license, so all rights stay with supsenpaii. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Iot classroom without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k