Flight controller
SurajShivakumar·AIPCB·workspace/fc/flight_controller.kicad_pcb
About the Flight controller PCB
Flight controller is an open source STM32 PCB design by SurajShivakumar, published on GitHub. It is a 4-layer board measuring 71.2 × 80.6 mm, with 103 components from 45 distinct parts.
Its main chip is the STM32H743IITx, from the STM32 family. Other key parts include the AP7361C-33E, MPU-6000, BMP280, USBLC6-2SC6 and MP4572GQB-P. By type, the board carries 59 capacitors, 22 resistors, 6 ICs, 6 connectors, 4 inductors and 2 switches.
It belongs with the robotics & motion designs in this gallery.
From the project
An AI PCB Generator. Completely automated.
Prompt an LLM to read, review, simulate and edit KiCad projects while you watch the changes in a browser.
It has two parts, both MCP servers, so any MCP client can use them (Claude Code, Claude Desktop, Cursor, opencode + a local model):
You need KiCad 9 or 10, Node 18+, Python 3.11+ and git. LTspice is optional; ngspice comes with KiCad.
The script clones the engine at its pinned tag, builds it against KiCad's Python, installs the copilot and runs the tests.
Main components on the Flight controller
Flight controller bill of materials (BOM)
103 components, 45 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AP7361C-33E | SOT-223-3_TabPin2 | U1 |
| 1 | MPU-6000 | InvenSense_QFN-24_4x4mm_P0.5mm | U2 |
| 1 | BMP280 | Bosch_LGA-8_2x2.5mm_P0.65mm_ClockwisePinNumbering | U3 |
| 1 | STM32H743IITx | LQFP-176_24x24mm_P0.5mm | U4 |
| 1 | USBLC6-2SC6 | SOT-23-6 | U5 |
| 1 | MP4572GQB-P | QFN-12_MPQ4572-AEC1_MNP | U6 |
| 1 | 16MHz | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | Conn_01x08_Pin | JST_GH_BM08B-GHS-TBT_1x08-1MP_P1.25mm_Vertical | J1 |
| 1 | Micro_SD_Card | microSD_HC_Wuerth_693072010801 | J2 |
| 2 | Conn_01x04_Pin | PinHeader_1x04_P2.54mm_Vertical | J3, J5 |
| 1 | USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J4 |
| 1 | Conn_01x10_Pin | JST_GH_BM10B-GHS-TBT_1x10-1MP_P1.25mm_Vertical | J6 |
| 1 | BZT52C6V2-7-F | D_SOD-123 | CR1 |
| 1 | Jumper_2_Open | SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP1 |
| 1 | SW_SPDT | SW_SPDT_PCM12 | SW1 |
| 1 | SW_Push | SW_SPST_TL3342 | SW2 |
| 1 | GREEN | LED_0603_1608Metric | D1 |
| 1 | 120R | L_0603_1608Metric | FB1 |
| 1 | 240n | L_0603_1608Metric | L1 |
| 1 | 4.7u | L_Bourns-SRN4018 | L2 |
Show 25 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 15u | L_Bourns-SRN4018 | L3 |
| 1 | 4700n | C_0603_1608Metric | C1 |
| 24 | 100n | C_0402_1005Metric | C2, C3, C4, C6, C7, C8, C10, C13 +16 |
| 2 | 22p | C_0402_1005Metric | C5, C11 |
| 2 | 22u | C_0805_2012Metric | C9, C12 |
| 6 | 0.1u | C_0402_1005Metric | C17, C31, C37, C46, C50, C52 |
| 1 | 4.7u | C_0402_1005Metric | C20 |
| 2 | 2.2u | C_0402_1005Metric | C29, C30 |
| 6 | 1u | C_0402_1005Metric | C35, C36, C42, C43, C51, C59 |
| 4 | 1n | C_0402_1005Metric | C38, C40, C55, C57 |
| 4 | 10n | C_0402_1005Metric | C39, C41, C56, C58 |
| 4 | 10u | C_0402_1005Metric | C44, C45, C48, C49 |
| 3 | 22u | C_0402_1005Metric | C47, C53, C54 |
| 3 | 10k | R_0402_1005Metric | R1, R3, R12 |
| 1 | 1k | R_0402_1005Metric | R2 |
| 2 | 2k2 | R_0402_1005Metric | R4, R5 |
| 5 | 47k | R_0402_1005Metric | R6, R8, R9, R10, R11 |
| 1 | 22 | R_0402_1005Metric | R7 |
| 2 | 5k1 | R_0402_1005Metric | R13, R14 |
| 1 | 10 | R_0402_1005Metric | R15 |
| 3 | 100k | R_0402_1005Metric | R16, R17, R22 |
| 1 | 20k | R_0402_1005Metric | R18 |
| 1 | 7k68 | R_0402_1005Metric | R19 |
| 1 | 41k2 | R_0402_1005Metric | R20 |
| 1 | 76k8 | R_0402_1005Metric | R21 |
Flight controller design files
The KiCad project lives in the SurajShivakumar/AIPCB repository on GitHub; these links point at the commit this page was built from.
Flight controller: common questions
What microcontroller does the Flight controller use?
The Flight controller is built around the STM32H743IITx, from the STM32 family.
How big is the Flight controller PCB?
The Flight controller measures 71.2 × 80.6 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Flight controller?
103 components, from 45 distinct parts. The full bill of materials is listed on this page.
Where can I download the Flight controller design files?
From the SurajShivakumar/AIPCB repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Flight controller design in my own project?
The repository has no license, so all rights stay with SurajShivakumar. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Flight controller without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in AIPCB
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k