54 open source boards using the AP7361C-33E
Real designs built with the AP7361C-33E, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ChainlinkDriverTester
scottbez1
198.1 × 95.3 mm123 parts2LApache-2.04.2kAVR/Arduino
Arduino UNO R4 WiFi
sabogalc
68.6 × 53.3 mm217 parts4LWTFPL93ESP32
Led o clock
denouche
49 × 35 mm18 parts2LNo license12ESP32
WaterRowerLinkPlus
nickbits1024
55 × 95 mm47 parts2LMIT9ESP32
UWB Fly Drone
DynamicWhiteHat
40 × 61 mm75 parts2LNo license4RP2040/RP2350
Controller
mikesmitty
101.2 × 28 mm96 parts4LNo license3ESP32
Lumenlab
ericmcdaniel
99.9 × 80 mm72 parts4LMIT3FPGA
Bus-Redundancy-Controller
jjgarrid
50 × 50 mm74 parts4LGPL-3.02RP2040/RP2350
DMXion 4port node
NEOgHacking
100 × 100 mm195 parts4LGPL-3.01ESP32
Reverb
DynamicWhiteHat
82.6 × 74.3 mm102 parts2LNo license1ESP32
Skimmer-Detector-PRO
planmarks
84.2 × 49.8 mm65 parts2LNo license1MoBo V2-1
robotique-udes
100 × 90.1 mm56 parts4LGPL-2.01Iron skulls mask
oscgonfer
37.3 × 58.8 mm22 parts2LNo license1STM32
Devhub
mpolci
172.5 × 85 mm212 parts4LMIT0ESP32
Telem3
5aji
124 × 80 mm151 parts4LNo license0AVR/Arduino
3phaseDiverter
FredM67
133.7 × 120.8 mm150 parts2LCC-BY-SA-4.00STM32
Middle
atelier-lyon
229.6 × 198.8 mm127 parts2LNo license0ESP32
Prod board
family-mruby
90 × 70 mm125 parts4LCERN-OHL-S-2.00ChainlinkDriverTester
kiwonbyun
198.1 × 95.3 mm123 parts2LApache-2.00ChainlinkDriverTester
nintando64
198.1 × 95.3 mm123 parts2LApache-2.00ChainlinkDriverTester
orgTestCodacy11KRepos110MB
198.1 × 95.3 mm123 parts2LApache-2.00ChainlinkDriverTester
rossbb
198.1 × 95.3 mm123 parts2LApache-2.00ESP32
Dronekit pro
AbdulAzeez0001
36 × 36 mm119 parts4LNo license0STM32
Flight controller
SurajShivakumar
71.2 × 80.6 mm103 parts4LNo license0STM32
Impulso stm32
ayemi-dev
100 × 70 mm87 parts2LNo license0RP2040/RP2350
PULP
JAS-UCF
84 × 38.1 mm68 parts2LCERN-OHL-S-2.00ESP32
EspressoMachineBoard
parya03
150 × 75 mm63 parts2LApache-2.00STM32
HW STM32H743 board WFL
wojtron2
38.5 × 38.5 mm59 parts4LNo license0ESP32
DH-LRC-0
lnvke
46 × 40 mm55 parts4LNo license0RP2040/RP2350
EPaper badge
krVishesh
90 × 57 mm54 parts2LNo license0ESP32
ClockClock24
Loredati-svg
78.9 × 51 mm41 parts4LNo license0ESP32
Smart fan
ben-willis
109.3 × 80 mm34 parts2LNo license0ESP32
WLED-controller
super9chriss
47.8 × 63.2 mm33 parts2LNo license0- schematic only · 57 partsESP32
Gps lora
Majorwhiskey
57 parts4LCERN-OHL-P-2.00 ChainlinkBase
scottbez1
98.4 × 190.5 mm119 parts2LApache-2.04.2kPrinthead
Fiberprinter
35 × 35 mm63 parts2LNo license4
How designs wire the AP7361C-33E
Read from the KiCad layouts of 38 open source designs, one per repository: what each pin of the AP7361C-33E connects to, and the resistors, capacitors and other passives placed on it.
- The VI pin has a decoupling capacitor on 37 of 38 designs, most often 4.7 µF (then 10 µF).
- The VO pin has a decoupling capacitor on 34 of 38 designs, most often 4.7 µF (then 10 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VIpin 1 | Connected to: 5V 82% · a signal 18% |
|
| GNDpin 2 | Connected to: GND 97% | — |
| VOpin 3 | Connected to: 3.3V 84% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ChainlinkBase by scottbez1, Arduino UNO R4 WiFi by sabogalc, Led o clock by denouche and WaterRowerLinkPlus by nickbits1024.
The AP7361C-33E in open source designs
The gallery holds 54 open source boards using the AP7361C-33E from 40 GitHub repositories; a typical one measures about 90 × 63.2 mm and carries around 73 components.
54% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.
The most starred is ChainlinkDriverTester by scottbez1.
Parts used alongside the AP7361C-33E
Microcontrollers on boards using the AP7361C-33E
What boards using the AP7361C-33E are built for
AP7361C-33E: common questions
Where can I find a AP7361C-33E reference design?
Each of the 54 boards on this page is a real design using the AP7361C-33E. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the AP7361C-33E VI pin?
The VI pin has a decoupling capacitor on 37 of 38 designs, most often 4.7 µF (then 10 µF). Counted from the KiCad layouts of 38 open source designs using the AP7361C-33E.
What decoupling capacitors do designs use on the AP7361C-33E VO pin?
The VO pin has a decoupling capacitor on 34 of 38 designs, most often 4.7 µF (then 10 µF). Counted from the KiCad layouts of 38 open source designs using the AP7361C-33E.
What parts are used alongside the AP7361C-33E?
The USBLC6-2SC6, Buck, INA219BxD, LM7805_TO220 and MCP23017_SS appear in the most repositories here.
Which microcontrollers do boards using the AP7361C-33E use?
Most are built on ESP32 (22), STM32 (9), RP2040/RP2350 (4) and AVR/Arduino (2).
How big is a typical board using the AP7361C-33E?
The median is 90 × 63.2 mm, and 54% are two-layer designs.
What is the most popular open source board using the AP7361C-33E?
By GitHub stars, ChainlinkDriverTester by scottbez1, with 4,156 stars.
Can I simulate one of these boards using the AP7361C-33E before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.