3 open source boards using the STM32H743IITx

Real designs built with the STM32H743IITx, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

3 boardsClear filters|Most starred

The STM32H743IITx in open source designs

The gallery holds 3 open source boards using the STM32H743IITx from 3 GitHub repositories; a typical one measures about 73.5 × 80.6 mm and carries around 103 components.

67% use four copper layers or more, and 33% carry an open source license.

The most starred is CMM2-JLC by Manawyrm.

Parts used alongside the STM32H743IITx

Microcontrollers on boards using the STM32H743IITx

What boards using the STM32H743IITx are built for

STM32H743IITx: common questions

Where can I find a STM32H743IITx reference design?

Each of the 3 boards on this page is a real design using the STM32H743IITx. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the STM32H743IITx use?

Most are built on STM32 (3).

How big is a typical board using the STM32H743IITx?

The median is 73.5 × 80.6 mm, and 33% are two-layer designs.

What is the most popular open source board using the STM32H743IITx?

By GitHub stars, CMM2-JLC by Manawyrm, with 10 stars.

Can I simulate one of these boards using the STM32H743IITx before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part