Esp32

suvi2005·ece445·digit/pcb/glove/esp32/esp32.kicad_pcb

Esp32 PCB layout, top view — open source ESP32 board by suvi2005

About the Esp32 PCB

Esp32 is an open source ESP32 PCB design by suvi2005, published on GitHub. It is a 2-layer board measuring 91.3 × 54.9 mm, with 73 components from 33 distinct parts.

Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the DRV2605LDGSR, LTC3119EFE#PBF and TCA9546ADR. By type, the board carries 25 resistors, 21 capacitors, 17 connectors, 5 ICs, 2 fuses and 1 switch.

Main components on the Esp32

Esp32 bill of materials (BOM)

73 components, 33 distinct parts.

QtyPartRefs
2
DRV2605LDGSR
IC1, IC2
1
LTC3119EFE#PBF
IC3
1
TCA9546ADR
IC4
1
ESP32-S3-WROOM-1
U1
1
Conn_01x02_Pin
J1
7
Conn_01x02_Pin
J2, J3, J5, J8, J12, J15, J17
1
Conn_01x03_Pin
J4
4
Conn_01x02_Pin
J6, J9, J13, J14
1
Conn_01x01_Pin
J7
1
USB_C_Receptacle_USB2.0_16P
J10
1
Conn_01x05_Pin
J11
1
Conn_01x04_Pin
J18
1
LSM6DSOXTR
AC1
2
MF-MSMF075-2
F1, F2
1
SW_Push
SW1
1
2.2µH
L1
1
10µF
C1
4
1µF
C2, C3, C7, C8
3
0.1µF
C4, C9, C13
1
4.7µF
C5
Show 13 more
QtyPartRefs
7
100nF
C6, C10, C14, C15, C16, C17, C18
1
470pF
C11
1
150µF
C12
2
0.1uF
C19, C20
1
22uF
C21
2
100k
R1, R10
1
48.7k
R2
8
10k
R3, R4, R5, R7, R8, R21, R22, R26
1
52.3k
R6
1
316k
R9
5
22k
R11, R13, R15, R19, R23
5
1k
R12, R14, R17, R20, R24
2
5.1k
R16, R18

Esp32 design files

The KiCad project lives in the suvi2005/ece445 repository on GitHub; these links point at the commit this page was built from.

Esp32: common questions

What microcontroller does the Esp32 use?

The Esp32 is built around the ESP32-S3-WROOM-1, from the ESP32 family.

How big is the Esp32 PCB?

The Esp32 measures 91.3 × 54.9 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Esp32?

73 components, from 33 distinct parts. The full bill of materials is listed on this page.

Where can I download the Esp32 design files?

From the suvi2005/ece445 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Esp32 design in my own project?

The repository has no license, so all rights stay with suvi2005. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Esp32 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in ece445

Similar boards