Acoustic research
svenclawdbot-ai·acoustic-research·turboquant_v5/hardware/schematics/turboquant_mux_lna_v5.kicad_pcb
About the Acoustic research PCB
Acoustic research is an open source PCB design by svenclawdbot-ai, published on GitHub. It is a 4-layer board measuring 100 × 80 mm, with 25 components from 13 distinct parts.
Other key parts include the LM7805, AMS1117-3.3, DG408, 74HCT595 and OPA1641. By type, the board carries 11 ICs, 8 transistors, 5 connectors and 1 fuse.
From the project
Multi-frequency shear wave elastography research
Version: 5.0 Date: 2026-05-02 Status: Schematics complete — PCB partially routed, needs KiCad GUI migration
- Layers: 4 (Signal / GND / Power / Signal) - Size: 100mm × 80mm - HV clearances: >2mm for 100V traces - Thermal: Copper pour under LM7805 DPAK tab - Partitioning: Power (top-left), Digital (top-right), Analog (center), TX (bottom)
See PCBLAYOUTPLAN.md for detailed floorplan and ROUTINGCHECKLIST.md` for routing priorities.
Main components on the Acoustic research
Acoustic research bill of materials (BOM)
25 components, 13 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM7805 | TO-252-2 | U1 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U2 |
| 2 | DG408 | SOIC-16_3.9x9.9mm_P1.27mm | U3, U4 |
| 1 | 74HCT595 | SOIC-16_3.9x9.9mm_P1.27mm | U5 |
| 2 | OPA1641 | SOIC-8_3.9x4.9mm_P1.27mm | U6, U7 |
| 4 | TC4427 | SOIC-8_3.9x4.9mm_P1.27mm | U8, U9, U10, U11 |
| 8 | IRF830 | TO-220-3_Vertical | Q9, Q10, Q11, Q12, Q13, Q14, Q15, Q16 |
| 1 | 12V_Input | TerminalBlock_bornier-2_P5.08mm | J1 |
| 1 | TX_BUS | SMA_EDGE | J2 |
| 1 | E1_GPIO | PinHeader_2x10_P2.54mm_Vertical | J3 |
| 1 | RX0_OUT | SMA_EDGE | J4 |
| 1 | RX1_OUT | SMA_EDGE | J5 |
| 1 | 2A | Fuse_1206_3216Metric | F1 |
Acoustic research design files
The KiCad project lives in the svenclawdbot-ai/acoustic-research repository on GitHub; these links point at the commit this page was built from.
Acoustic research: common questions
How big is the Acoustic research PCB?
The Acoustic research measures 100 × 80 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Acoustic research?
25 components, from 13 distinct parts. The full bill of materials is listed on this page.
Where can I download the Acoustic research design files?
From the svenclawdbot-ai/acoustic-research repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Acoustic research design in my own project?
The repository has no license, so all rights stay with svenclawdbot-ai. Use it as a reference, and ask the author before reusing the design.