18 open source boards using the TC4427

Real designs built with the TC4427, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

18 boardsClear filters|Most starred

How designs wire the TC4427

Read from the KiCad layouts of 15 open source designs, one per repository: what each pin of the TC4427 connects to, and the resistors, capacitors and other passives placed on it.

  • The VDD pin has a decoupling capacitor on 13 of 15 designs, most often 100 nF (then 1 µF).
  • The OUT_A pin has a series resistor on 11 of 15 designs, most often 100 Ω (then 2.7 kΩ).
  • The OUT_B pin has a series resistor on 9 of 15 designs, most often 100 Ω (then 2.7 kΩ).
  • The IN_A pin has a series resistor on 6 of 15 designs, most often 20 Ω (then 10 kΩ).
NCpin 1, 8Connected to: Not connected 100%
IN_Apin 2Connected to: A connector 40%, the microcontroller 33%
  • Series resistor on 40% · 20 Ω (2), 10 kΩ (2), 1 kΩ (1)
  • Resistor to GND on 33% · 10 kΩ (3), 1 kΩ (2)
GNDpin 3Connected to: GND 100%
IN_Bpin 4Connected to: A connector 33%, the microcontroller 27%
  • Series resistor on 33% · 20 Ω (2), 10 kΩ (2), 1 kΩ (1)
OUT_Bpin 5Connected to: Signal 80% · not connected 20%
  • Series resistor on 60% · 100 Ω (5), 2.7 kΩ (3), 10 Ω (2)
VDDpin 6Connected to: 12V 60% · a signal 40%
  • Decoupling capacitor on 87% · 100 nF (18), 1 µF (5), 4.7 µF (1)
OUT_Apin 7Connected to: Signal 100%
  • Series resistor on 73% · 100 Ω (5), 2.7 kΩ (3), 10 Ω (3)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Frankenso by rusefi, UPD-board by uniclogs, 1.3 by OpenLogicEFI and High or low side drive board for RUSEFI.com by rusefi.

The TC4427 in open source designs

The gallery holds 18 open source boards using the TC4427 from 16 GitHub repositories; a typical one measures about 100 × 82.5 mm and carries around 163 components.

75% are two-layer designs, the rest use four layers or more, and 22% carry an open source license.

The most starred is Frankenso by rusefi.

Microcontrollers on boards using the TC4427

TC4427: common questions

Where can I find a TC4427 reference design?

Each of the 18 boards on this page is a real design using the TC4427. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the TC4427 VDD pin?

The VDD pin has a decoupling capacitor on 13 of 15 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 15 open source designs using the TC4427.

What resistor goes on the TC4427 OUT_A pin?

The OUT_A pin has a series resistor on 11 of 15 designs, most often 100 Ω (then 2.7 kΩ). Counted from the KiCad layouts of 15 open source designs using the TC4427.

What resistor goes on the TC4427 OUT_B pin?

The OUT_B pin has a series resistor on 9 of 15 designs, most often 100 Ω (then 2.7 kΩ). Counted from the KiCad layouts of 15 open source designs using the TC4427.

What parts are used alongside the TC4427?

The MCP6004, AMS1117-3.3, BSS84, FT232RL and ITEAD_HC-0X appear in the most repositories here.

Which microcontrollers do boards using the TC4427 use?

Most are built on NXP (3), STM32 (3), AVR/Arduino (2) and Microchip SAM (1).

How big is a typical board using the TC4427?

The median is 100 × 82.5 mm, and 75% are two-layer designs.

What is the most popular open source board using the TC4427?

By GitHub stars, Frankenso by rusefi, with 48 stars.

Can I simulate one of these boards using the TC4427 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part