Seedling Imager board 2

sybednar·seedling-imager-controller-display2·hardware/Electronics/Seedling Imager board_2/Seedling Imager board_2.kicad_pcb

Seedling Imager board 2 layout, top view — open source board by sybednar

About the Seedling Imager board 2

Seedling Imager board 2 is an open source PCB design by sybednar, published on GitHub under the MIT license. It is a 2-layer board measuring 53.7 × 32.8 mm, with 21 components from 11 distinct parts.

Other key parts include the AO4805. By type, the board carries 10 resistors, 5 transistors, 4 connectors and 1 IC.

It belongs with the robotics & motion and sensors designs in this gallery.

From the project

Open-source hardware for an automated, six-plate time-lapse seedling imaging robot. This folder contains the mechanical CAD files, controller electronics (KiCad), bill of materials, and licensing for the imager; the Raspberry Pi controller and image-acquisition/registration softw

Open-source hardware for an automated, six-plate time-lapse seedling imaging robot. This folder contains the mechanical CAD files, controller electronics (KiCad), bill of materials, and licensing for the imager; the Raspberry Pi controller and image-acquisition/registration software live in the root of this repository.

The instrument is a rotating hexagonal carousel that holds up to six Petri plates and presents each in turn to a fixed high-resolution camera. It is controlled by a Raspberry Pi with a stepper motor and optical/magnetic position sensors, so every plate returns to the same…

Seedling Imager board 2, from the project README
From the project README

Main components on the Seedling Imager board 2

AO4805

Seedling Imager board 2 bill of materials (BOM)

21 components, 11 distinct parts.

QtyPartRefs
1
AO4805
U1
3
IRLZ44N
Q1, Q2, Q3
2
2N3904
Q4, Q5
1
691241510004
Wurth Elektronik
J1
1
22112062
J2
1
22112042
J3
1
22112032
J4
1
~
PCB1
5
10K
R1, R2, R3, R7, R8
3
220
R4, R5, R6
2
2.2K
R9, R10

Seedling Imager board 2 design files

The KiCad project lives in the sybednar/seedling-imager-controller-display2 repository on GitHub; these links point at the commit this page was built from.

Seedling Imager board 2: common questions

How big is the Seedling Imager board 2?

The Seedling Imager board 2 measures 53.7 × 32.8 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Seedling Imager board 2?

21 components, from 11 distinct parts. The full bill of materials is listed on this page.

Where can I download the Seedling Imager board 2 design files?

From the sybednar/seedling-imager-controller-display2 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Seedling Imager board 2 design in my own project?

Yes, under the terms of its MIT license, which sybednar chose for the repository.

More boards in seedling-imager-controller-display2

Similar boards