Seedling Imager hall sensor board
sybednar·seedling-imager-controller-display2·hardware/Electronics/Seedling Imager hall sensor board/Seedling Imager hall sensor board.kicad_pcb
About the Seedling Imager hall sensor board
Seedling Imager hall sensor board is an open source PCB design by sybednar, published on GitHub under the MIT license. It is a 2-layer board measuring 14.3 × 16.2 mm, with 3 components from 3 distinct parts.
Other key parts include the A3144 and A1104xLH. By type, the board carries 1 IC, 1 module and 1 connector.
It belongs with the sensors and robotics & motion designs in this gallery.
From the project
Open-source hardware for an automated, six-plate time-lapse seedling imaging robot. This folder contains the mechanical CAD files, controller electronics (KiCad), bill of materials, and licensing for the imager; the Raspberry Pi controller and image-acquisition/registration softw
Open-source hardware for an automated, six-plate time-lapse seedling imaging robot. This folder contains the mechanical CAD files, controller electronics (KiCad), bill of materials, and licensing for the imager; the Raspberry Pi controller and image-acquisition/registration software live in the root of this repository.
The instrument is a rotating hexagonal carousel that holds up to six Petri plates and presents each in turn to a fixed high-resolution camera. It is controlled by a Raspberry Pi with a stepper motor and optical/magnetic position sensors, so every plate returns to the same…

Main components on the Seedling Imager hall sensor board
Seedling Imager hall sensor board bill of materials (BOM)
3 components, 3 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | A3144 | TO-92Flat | U1 |
| 1 | A1104xLH | TO-92L_Inline | A3144 |
| 1 | 22053031 | CONN_A-7478-03A_MOL | J1 |
Seedling Imager hall sensor board design files
The KiCad project lives in the sybednar/seedling-imager-controller-display2 repository on GitHub; these links point at the commit this page was built from.
Seedling Imager hall sensor board: common questions
How big is the Seedling Imager hall sensor board?
The Seedling Imager hall sensor board measures 14.3 × 16.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Seedling Imager hall sensor board?
3 components, from 3 distinct parts. The full bill of materials is listed on this page.
Where can I download the Seedling Imager hall sensor board design files?
From the sybednar/seedling-imager-controller-display2 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Seedling Imager hall sensor board design in my own project?
Yes, under the terms of its MIT license, which sybednar chose for the repository.
More boards in seedling-imager-controller-display2
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kCube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1k