HardLabs

Fakedeck

syuchan1005·Fakedeck·assets/Plus/kicad/Fakedeck.kicad_pcb

Fakedeck PCB layout, top view — open source RP2040/RP2350 board by syuchan1005
Simulate this board

About the Fakedeck PCB

Fakedeck is an open source RP2040/RP2350 PCB design by syuchan1005, published on GitHub. It is a 2-layer board measuring 61.5 × 70.5 mm, with 13 components from 9 distinct parts.

Its main chip is the Pico, from the RP2040/RP2350 family. By type, the board carries 5 resistors, 4 switches, 2 connectors and 1 IC.

It belongs with the displays & leds designs in this gallery.

From the project

Using raspberry pi pico as a stream deck

This project access WiFi AP. You should copy config.sample.ini to config.ini, and change values to your Wifi settings.

Fakedeck, from the project README
From the project README

Main components on the Fakedeck

Pico

Fakedeck bill of materials (BOM)

13 components, 9 distinct parts.

QtyPartRefs
1
Pico
U1
2
Conn_01x11_Pin
J1, J3
4
RotaryEncoder_Switch
SW1, SW2, SW3, SW4
1
JC8048M050R
TFT1
1
120
R1
1
220
R2
1
470
R3
1
1K
R4
1
47
R5

Fakedeck design files

The KiCad project lives in the syuchan1005/Fakedeck repository on GitHub; these links point at the commit this page was built from.

Fakedeck: common questions

What microcontroller does the Fakedeck use?

The Fakedeck is built around the Pico, from the RP2040/RP2350 family.

How big is the Fakedeck PCB?

The Fakedeck measures 61.5 × 70.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Fakedeck?

13 components, from 9 distinct parts. The full bill of materials is listed on this page.

Where can I download the Fakedeck design files?

From the syuchan1005/Fakedeck repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Fakedeck design in my own project?

The repository has no license, so all rights stay with syuchan1005. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Fakedeck without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in Fakedeck

Similar boards