EG8504 RP2040

Talkie181·EG8504_RP2040

EG8504 RP2040 PCB layout, top view — open source RP2040/RP2350 board by Talkie181

About the EG8504 RP2040 PCB

EG8504 RP2040 is an open source RP2040/RP2350 PCB design by Talkie181, published on GitHub. It is a 2-layer board measuring 31.8 × 74.3 mm, with 50 components from 31 distinct parts.

Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the W25Q16JVSS, MIC5504-3.3YM5, USBLC6-2SC6 and MC34063AD. By type, the board carries 19 capacitors, 13 resistors, 5 ICs, 5 connectors, 4 diodes and 2 switches.

Main components on the EG8504 RP2040

EG8504 RP2040 bill of materials (BOM)

50 components, 31 distinct parts.

QtyPartRefs
1
RP2040
U1
1
W25Q16JVSS
U2
1
MIC5504-3.3YM5
U3
1
USBLC6-2SC6
U4
1
MC34063AD
U5
1
ECS-3225MV-xxx-xx
Y1
1
USB_C_Receptacle_USB2.0_16P
J1
1
522712079
J2
1
Conn_01x03_Socket
J3
2
Conn_01x14_Socket
J4, J5
1
5k
RV1
2
SW_Push
SW1, SW2
1
SMF5V0A
D1
1
CH213K
D2
1
1N5819
D3
1
LED_Small
D4
10
100n
C1, C2, C3, C4, C5, C6, C7, C8 +2
2
1u
C10, C11
2
22p
C13, C14
2
10u
C15, C16
Show 11 more
QtyPartRefs
1
1500p
C18
1
100u
C19
1
330u
C20
4
1k
R2, R3, R9, R14
2
27
R4, R5
2
5k1
R6, R7
1
10k
R8
1
15k
R10
1
180
R11
1
0.22
R12
1
3.3k
R13

EG8504 RP2040 design files

The KiCad project lives in the Talkie181/EG8504_RP2040 repository on GitHub; these links point at the commit this page was built from.

EG8504 RP2040: common questions

What microcontroller does the EG8504 RP2040 use?

The EG8504 RP2040 is built around the RP2040, from the RP2040/RP2350 family.

How big is the EG8504 RP2040 PCB?

The EG8504 RP2040 measures 31.8 × 74.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the EG8504 RP2040?

50 components, from 31 distinct parts. The full bill of materials is listed on this page.

Where can I download the EG8504 RP2040 design files?

From the Talkie181/EG8504_RP2040 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the EG8504 RP2040 design in my own project?

The repository has no license, so all rights stay with Talkie181. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the EG8504 RP2040 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards