Taranium-Badge
Taran-the-Idiot·Taranium-Badge·PCB/PCB.kicad_pcb
About the Taranium-Badge PCB
Taranium-Badge is an open source RP2040/RP2350 PCB design by Taran-the-Idiot, published on GitHub under the MIT license. It is a 2-layer board measuring 100 × 63 mm, with 51 components from 22 distinct parts.
Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the W25Q32JVSS and NCP1117-3.3_SOT223. By type, the board carries 26 capacitors, 11 resistors, 4 ICs, 4 diodes, 2 switches and 1 transistor.
It belongs with the wearables and displays & leds designs in this gallery.
From the project
Cool e ink badges
Features: - RP2040 Microcontroller - 4mb flash - Powerless Functions - E ink lets it work without a power supply
Bottom left corner and bottom middle is everything related to the e-ink display. The rest is all microcontroller stuff.
This is a 2 layer design that has a ground fill on both sides. I tried my best to route it cleanly but there might be some things off about it. I will update in the future if any errors are found

Main components on the Taranium-Badge
Taranium-Badge bill of materials (BOM)
51 components, 22 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RP2040 | QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U1 |
| 1 | W25Q32JVSS | SOIC-8_5.3x5.3mm_P1.27mm | U2 |
| 1 | ~ | FPC-SMD_24P-P0.50_05A20L24P | U3 |
| 1 | NCP1117-3.3_SOT223 | SOT-223-3_TabPin2 | U4 |
| 1 | NMOS | SOT-23 | Q1 |
| 1 | 12 MHz | CRYSTAL-SMD_4P-L3.2-W2.5-BL | Y1 |
| 1 | USB_C_Receptacle_USB2.0_16P | USB-C-SMD_20P-P0.50-L6.5-W8.9 | J1 |
| 1 | RESET | C720477 | SW1 |
| 1 | BOOT | C720477 | SW2 |
| 3 | D_Small | D_SOD-123 | D1, D2, D3 |
| 1 | LED | LED_0805_2012Metric | D4 |
| 1 | L_Small | IND-SMD_L6.0-W6.0_FNR60XXS | L1 |
| 12 | 0.1uF | C_0402_1005Metric | C1, C2, C3, C4, C5, C6, C7, C8 +4 |
| 8 | 1uF | C_0402_1005Metric | C13, C14, C15, C16, C17, C18, C19, C20 |
| 2 | 4.7uF | C_0603_1608Metric | C21, C23 |
| 2 | 10uF | C_0805_2012Metric | C22, C24 |
| 2 | 33pF | C_0402_1005Metric | C25, C26 |
| 2 | 27 | R_0402_1005Metric | R1, R2 |
| 4 | 10k | R_0402_1005Metric | R3, R4, R6, R7 |
| 2 | 1k | R_0402_1005Metric | R5, R11 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 2.2 | R_0402_1005Metric | R8, R10 |
| 1 | 1M | R_0402_1005Metric | R9 |
Taranium-Badge design files
The KiCad project lives in the Taran-the-Idiot/Taranium-Badge repository on GitHub; these links point at the commit this page was built from.
Taranium-Badge: common questions
What microcontroller does the Taranium-Badge use?
The Taranium-Badge is built around the RP2040, from the RP2040/RP2350 family.
How big is the Taranium-Badge PCB?
The Taranium-Badge measures 100 × 63 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Taranium-Badge?
51 components, from 22 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Taranium-Badge design files?
From the Taran-the-Idiot/Taranium-Badge repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Taranium-Badge design in my own project?
Yes, under the terms of its MIT license, which Taran-the-Idiot chose for the repository.
Can I test firmware for the Taranium-Badge without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k