HardLabs

Esp32s2-usb uart

TDA-2030·esp32s2-usb-uart

Esp32s2-usb uart PCB layout, top view — open source ESP32 board by TDA-2030

About the Esp32s2-usb uart PCB

Esp32s2-usb uart is an open source ESP32 PCB design by TDA-2030, published on GitHub under the Apache-2.0 license. It is a 2-layer board measuring 30 × 14 mm, with 44 components from 23 distinct parts.

Its main chip is the ESP32-S2FH4, from the ESP32 family. Other key parts include the AMS1117-3.3 and USBLC6-2SC6. By type, the board carries 16 capacitors, 11 resistors, 7 diodes, 3 ICs, 3 connectors and 1 crystal.

It belongs with the usb & debug tools and iot & wireless designs in this gallery.

From the project

USB to UART by ESP32-S2

- [x] USB to UART - [x] PCB size: 30mm x 14mm - [x] All output with ESD protection - [x] 3 LEDs - [x] LEDs to indicate UART signal - [x] 3.3V output - [x] Either USBA or Type-C plug - [ ] Auto download for ESP series chips - [ ] Wireless connecting

Esp32s2-usb uart, from the project README
From the project README

Main components on the Esp32s2-usb uart

AMS1117-3.3USBLC6-2SC6ESP32-S2FH4

Esp32s2-usb uart bill of materials (BOM)

44 components, 23 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
AMS1117-3.3
U1
1
USBLC6-2SC6
U2
1
ESP32-S2FH4
U3
1
CRYSTAL_GND24_SMALL
Crystal_GND24_Small
Y1
1
USB_A
J1
1
USB_C_RECEPTACLE_USB2.0
USB_C_Receptacle_USB2.0
J2
1
CONN_02X05_COUNTER_CLOCKWISE
Conn_02x05_Counter_Clockwise
J3
1
Antenna_Chip
AE1
1
SW_Push
SW1
1
RED
D1
1
GREEN
D2
1
BLUE
D3
2
PESD5V0L5UY
D4, D5
2
LED_YELLOW
D10, D11
1
L
L1
3
10UF
10uf
C1, C2, C3
9
0.1UF
0.1uf
C4, C5, C6, C7, C9, C11, C12, C13 +1
2
10PF
10pf
C8, C10
2
TBD
C15, C16
2
22
R1, R2
Show 3 more
QtyPartRefs
5
1k
R3, R4, R5, R8, R9
2
10K
10k
R6, R7
2
5.1K
5.1k
R10, R11

Esp32s2-usb uart design files

The KiCad project lives in the TDA-2030/esp32s2-usb-uart repository on GitHub; these links point at the commit this page was built from.

Esp32s2-usb uart: common questions

What microcontroller does the Esp32s2-usb uart use?

The Esp32s2-usb uart is built around the ESP32-S2FH4, from the ESP32 family.

How big is the Esp32s2-usb uart PCB?

The Esp32s2-usb uart measures 30 × 14 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Esp32s2-usb uart?

44 components, from 23 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Esp32s2-usb uart design files?

From the TDA-2030/esp32s2-usb-uart repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Esp32s2-usb uart design in my own project?

Yes, under the terms of its Apache-2.0 license, which TDA-2030 chose for the repository.

Can I test firmware for the Esp32s2-usb uart without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards