9 open source boards using the ESP32-S2FH4
Real designs built with the ESP32-S2FH4, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
PMK 180mm
PumaFPV
181.7 × 172.3 mm147 parts2LMIT4ESP32
CopterCat cm4
matveylapin
40 × 55 mm156 parts4LApache-2.03ESP32
Esp32s2-usb uart
TDA-2030
30 × 14 mm44 parts2LApache-2.03ESP32
MainBoard
meawoppl
139.7 × 63.5 mm245 parts2LNo license0ESP32
Main
rohit-env
161 × 87 mm183 parts4LNo license0ESP32
Kicad probe scope
noahensley
152.1 × 36 mm77 parts2LMIT0ESP32
Module
meawoppl
20 × 45 mm49 parts4LNo license0ESP32
PMK Dongle HW01
PumaFPV
10.4 × 15.4 mm36 parts4LMIT4ESP32
PMK Dongle
PumaFPV
10.4 × 18.3 mm31 parts4LMIT4
How designs wire the ESP32-S2FH4
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the ESP32-S2FH4 connects to, and the resistors, capacitors and other passives placed on it.
- The VDD3P3_2 pin has a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 10 µF).
- The VDDA_1 pin has a decoupling capacitor on 5 of 6 designs, most often 100 nF (then 10 µF).
- The VDD3P3_1 pin has a decoupling capacitor on 5 of 6 designs, most often 100 nF (then 10 µF).
- The VDD3P3_RTC pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 10 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VDDA_1pin 1 | Connected to: 3.3V 67% · a signal 33% |
|
| LNA_INpin 2 | Connected to: Signal 83% · not connected 17% |
|
| VDD3P3_1pin 3 | Connected to: 3.3V 67% · a signal 33% |
|
| VDD3P3_2pin 4 | Connected to: 3.3V 67% · a signal 33% |
|
| GPIO1pin 6 | Connected to: Not connected 67% · a signal 33% | — |
| GPIO3pin 8 | Connected to: Not connected 67% · VBAT 17% · a signal 17% | — |
| GPIO4pin 9 | Connected to: Not connected 67% · VBAT 17% · a signal 17% | — |
| GPIO5pin 10 | Connected to: Not connected 67% · VSYS 17% · a signal 17% | — |
| GPIO6pin 11 | Connected to: Not connected 80% · a signal 20% | — |
| GPIO7pin 12 | Connected to: Not connected 60% · a signal 40% | — |
| GPIO8pin 13 | Connected to: Not connected 60% · a signal 40% | — |
| GPIO12pin 17 | Connected to: Not connected 60% · a signal 40% | — |
| VDD3P3_RTCpin 20 | Connected to: 3.3V 80% · a signal 20% |
|
| XTAL_32K_Ppin 21 | Connected to: Not connected 100% | — |
| XTAL_32K_Npin 22 | Connected to: Not connected 100% | — |
| DAC_1pin 23 | Connected to: Not connected 80% · a signal 20% | — |
| DAC_2pin 24 | Connected to: Signal 60% · not connected 40% |
|
| VDD3P3_RTC_IOpin 27 | Connected to: 3.3V 80% · a signal 20% |
|
| GPIO21pin 28 | Connected to: Not connected 100% | — |
| SPICS1pin 29 | Connected to: Not connected 80% · a signal 20% | — |
| VDD_SPIpin 30 | Connected to: VDD_SPI 60% · a signal 40% |
|
| SPIHDpin 31 | Connected to: Not connected 60% · a signal 40% | — |
| SPIWPpin 32 | Connected to: Not connected 60% · a signal 40% | — |
| SPICS0pin 33 | Connected to: Not connected 60% · a signal 40% | — |
| SPIQpin 35 | Connected to: Not connected 60% · a signal 40% | — |
| SPIDpin 36 | Connected to: Not connected 60% · a signal 40% | — |
| GPIO34pin 38 | Connected to: Not connected 60% · a signal 40% | — |
| GPIO35pin 39 | Connected to: Not connected 60% · a signal 40% | — |
| MTCKpin 43 | Connected to: Not connected 60% · a signal 40% | — |
| MTD0pin 44 | Connected to: Not connected 60% · a signal 40% | — |
| VDD3P3_CPUpin 45 | Connected to: 3.3V 80% · a signal 20% |
|
| MTDIpin 46 | Connected to: Not connected 80% · a signal 20% | — |
| MTMSpin 47 | Connected to: Not connected 80% · a signal 20% | — |
| U0TXDpin 48 | Connected to: Signal 80% · not connected 20% |
|
| U0RXDpin 49 | Connected to: Signal 80% · not connected 20% |
|
| GPIO45pin 50 | Connected to: Not connected 100% | — |
| VDDA_2pin 51 | Connected to: 3.3V 80% · a signal 20% |
|
| XTAL_Npin 52 | Connected to: Signal 100% |
|
| XTAL_Ppin 53 | Connected to: Signal 100% |
|
| VDDA_3pin 54 | Connected to: 3.3V 80% · a signal 20% |
|
17 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include PMK Dongle by PumaFPV, CopterCat cm4 by matveylapin, Esp32s2-usb uart by TDA-2030 and MainBoard by meawoppl.
The ESP32-S2FH4 in open source designs
The gallery holds 9 open source boards using the ESP32-S2FH4 from 6 GitHub repositories; a typical one measures about 40 × 45 mm and carries around 77 components.
56% use four copper layers or more, and 67% carry an open source license.
The most starred is PMK 180mm by PumaFPV.
Parts used alongside the ESP32-S2FH4
Microcontrollers on boards using the ESP32-S2FH4
What boards using the ESP32-S2FH4 are built for
ESP32-S2FH4: common questions
Where can I find a ESP32-S2FH4 reference design?
Each of the 9 boards on this page is a real design using the ESP32-S2FH4. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the ESP32-S2FH4 VDD3P3_2 pin?
The VDD3P3_2 pin has a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 6 open source designs using the ESP32-S2FH4.
What decoupling capacitors do designs use on the ESP32-S2FH4 VDDA_1 pin?
The VDDA_1 pin has a decoupling capacitor on 5 of 6 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 6 open source designs using the ESP32-S2FH4.
What decoupling capacitors do designs use on the ESP32-S2FH4 VDD3P3_1 pin?
The VDD3P3_1 pin has a decoupling capacitor on 5 of 6 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 6 open source designs using the ESP32-S2FH4.
Which microcontrollers do boards using the ESP32-S2FH4 use?
Most are built on ESP32 (9).
How big is a typical board using the ESP32-S2FH4?
The median is 40 × 45 mm, and 44% are two-layer designs.
What is the most popular open source board using the ESP32-S2FH4?
By GitHub stars, PMK 180mm by PumaFPV, with 4 stars.
Can I simulate one of these boards using the ESP32-S2FH4 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.