HardLabs

Td combined remote

tdaede·td-crt·td-combined-remote/td-combined-remote.kicad_pcb

Td combined remote PCB layout, top view — open source board by tdaede

About the Td combined remote PCB

Td combined remote is an open source PCB design by tdaede, published on GitHub. It is a 2-layer board measuring 198 × 26 mm, with 14 components from 4 distinct parts.

It belongs with the power & battery designs in this gallery.

From the project

tubes

This repo contains work-in-progress electronics to control a CRT monitor (aka a CRT chassis).

It is divided up into several separate projects, as follows:

td-deflect** - Main PCB, containing microcontroller, horizontal and vertical deflection circuits, RGB amplifier, B+ power supply, 12V and -12V power supplies, and heater power supply. Functional with an enormous amount of rework.

Td combined remote bill of materials (BOM)

14 components, 4 distinct parts.

QtyPartRefs
1
Conn_01x10_Pin
J1
1
Conn_01x06_Pin
J2
6
R_Potentiometer
RV1, RV2, RV9, RV10, RV11, RV12
6
R_Potentiometer_Trim
RV3, RV4, RV5, RV6, RV7, RV8

Td combined remote design files

The KiCad project lives in the tdaede/td-crt repository on GitHub; these links point at the commit this page was built from.

Td combined remote: common questions

How big is the Td combined remote PCB?

The Td combined remote measures 198 × 26 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Td combined remote?

14 components, from 4 distinct parts. The full bill of materials is listed on this page.

Where can I download the Td combined remote design files?

From the tdaede/td-crt repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Td combined remote design in my own project?

The repository has no license, so all rights stay with tdaede. Use it as a reference, and ask the author before reusing the design.

More boards in td-crt

Similar boards