Dihdah blue r2
tdwgithub·dih-dah-blue·hardware/panel/dihdah_blue_r2.kicad_pcb
About the Dihdah blue r2 PCB
Dihdah blue r2 is an open source ESP32 PCB design by tdwgithub, published on GitHub under the CERN-OHL-P-2.0 license. It is a 2-layer board measuring 104.7 × 50.8 mm, with 22 components from 16 distinct parts.
Its main chip is the XIAO-ESP32-C6, from the ESP32 family. Other key parts include the ASSR-1228-002E. By type, the board carries 5 resistors, 4 connectors, 3 diodes, 3 capacitors, 2 ICs and 2 switches.
It belongs with the iot & wireless and power & battery designs in this gallery.
From the project
ESP32C6 Wireless CW paddle project
A Bluetooth LE wireless link between a Morse code (CW) paddle and a radio.
Dih Dah Blue replaces the cable between your CW paddle and your radio with a pair of small battery-powered boards. The paddle-side board watches the paddle contacts and sends each transition over Bluetooth LE. The radio-side board drives a solid-state relay wired to the radio's key input. To your radio, it looks like the paddle is plugged straight in.

Main components on the Dihdah blue r2
Dihdah blue r2 bill of materials (BOM)
22 components, 16 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XIAO-ESP32-C6 | XIAO-ESP32C6-DIP | U1 |
| 1 | ASSR-1228-002E | DIP-8_W7.62mm | U2 |
| 2 | Screw_Terminal_01x03 | 691313510003 | J1, J5 |
| 1 | Conn_01x02 | JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | J3 |
| 1 | Conn_01x02_Pin | PinHeader_1x02_P2.54mm_Vertical | J4 |
| 2 | Conn_01x02_Pin | PinHeader_1x02_P2.54mm_Vertical | Batt1, EN1 |
| 2 | SW_Push | SW_Tactile_SPST_Angled_PTS645Vx83-2LFS | SW1, SW2 |
| 1 | VAL** | mouse-bite-1mm-slot | mouse-bite-1mm-slot |
| 1 | LED | LED_D3.0mm_Horizontal_O1.27mm_Z6.0mm | D1 |
| 2 | P4KE15CA | D_DO-41_SOD81_P10.16mm_Horizontal | D2, D3 |
| 1 | 0.1uF | C_Disc_D3.0mm_W1.6mm_P2.50mm | C1 |
| 1 | 100 nF | C_Disc_D5.0mm_W2.5mm_P5.00mm | C2 |
| 1 | 0.01uF | C_Disc_D3.0mm_W1.6mm_P2.50mm | C3 |
| 2 | 180 ohm | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2 |
| 1 | 1 k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3 |
| 2 | 10 ohm | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4, R5 |
Dihdah blue r2 design files
The KiCad project lives in the tdwgithub/dih-dah-blue repository on GitHub; these links point at the commit this page was built from.
Dihdah blue r2: common questions
What microcontroller does the Dihdah blue r2 use?
The Dihdah blue r2 is built around the XIAO-ESP32-C6, from the ESP32 family.
How big is the Dihdah blue r2 PCB?
The Dihdah blue r2 measures 104.7 × 50.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Dihdah blue r2?
22 components, from 16 distinct parts. The full bill of materials is listed on this page.
Where can I download the Dihdah blue r2 design files?
From the tdwgithub/dih-dah-blue repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Dihdah blue r2 design in my own project?
Yes, under the terms of its CERN-OHL-P-2.0 license, which tdwgithub chose for the repository.
Can I test firmware for the Dihdah blue r2 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in dih-dah-blue
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k