Paddle

tdwgithub·dih-dah-blue·hardware/paddle/Paddle.kicad_pcb

Paddle PCB layout, top view — open source ESP32 board by tdwgithub

About the Paddle PCB

Paddle is an open source ESP32 PCB design by tdwgithub, published on GitHub under the CERN-OHL-P-2.0 license. It is a 2-layer board measuring 50.8 × 50.8 mm, with 12 components from 9 distinct parts.

Its main chip is the XIAO-ESP32-C6, from the ESP32 family. By type, the board carries 4 connectors, 3 resistors, 2 switches, 1 IC, 1 diode and 1 capacitor.

It belongs with the iot & wireless and power & battery designs in this gallery.

From the project

ESP32C6 Wireless CW paddle project

A Bluetooth LE wireless link between a Morse code (CW) paddle and a radio.

Dih Dah Blue replaces the cable between your CW paddle and your radio with a pair of small battery-powered boards. The paddle-side board watches the paddle contacts and sends each transition over Bluetooth LE. The radio-side board drives a solid-state relay wired to the radio's key input. To your radio, it looks like the paddle is plugged straight in.

Paddle, from the project README
From the project README

Main components on the Paddle

Paddle bill of materials (BOM)

12 components, 9 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
XIAO-ESP32-C6
U1
2
Conn_01x02_Pin
J1, J4
1
Conn_01x02
J3
1
Screw_Terminal_01x03
J5
2
SW_Push
SW1, SW2
1
~
D1
1
0.1uF
C1
2
100K
R1, R2
1
1K
R3

Paddle design files

The KiCad project lives in the tdwgithub/dih-dah-blue repository on GitHub; these links point at the commit this page was built from.

Paddle: common questions

What microcontroller does the Paddle use?

The Paddle is built around the XIAO-ESP32-C6, from the ESP32 family.

How big is the Paddle PCB?

The Paddle measures 50.8 × 50.8 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Paddle?

12 components, from 9 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Paddle design files?

From the tdwgithub/dih-dah-blue repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Paddle design in my own project?

Yes, under the terms of its CERN-OHL-P-2.0 license, which tdwgithub chose for the repository.

Can I test firmware for the Paddle without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in dih-dah-blue

Similar boards