Triforce control

TeamTriforceUK·triforce-control-pcb·pcb/triforce-control.kicad_pcb

Triforce control PCB layout, top view — open source ESP8266 board by TeamTriforceUK

About the Triforce control PCB

Triforce control is an open source ESP8266 PCB design by TeamTriforceUK, published on GitHub under the CERN-OHL-1.2 license. It is a 2-layer board measuring 75 × 86 mm, with 13 components from 12 distinct parts.

Its main chip is the ADAFRUIT_HUZZAH, from the ESP8266 family. Other key parts include the bno055, LPC1768 and SN65HVD232. By type, the board carries 6 LEDs, 4 ICs and 3 connectors.

It belongs with the robotics & motion, iot & wireless and sensors designs in this gallery.

From the project

An open source KiCAD PCB design for the Triforce Fight Controller.

The Triforce Control firmware (mbed OS) runs on an LPC1768 (ARM Cortex M3). The firmware is responsible for controlling the robot.

The Triforce Telemetry repository hosts firmware (FreeRTOS) for the ESP8266 WiFi chip. This microcontroller works alongside the mbed to provide telemetry functionality via an HTTP server.

The ESP8266 allows us to communicate telemetry from Triforce to connected mobile devices (tablets, laptops, mobile phones). We also control non-safety critical settings such as LED lights from the mobile device.

Main components on the Triforce control

Triforce control bill of materials (BOM)

13 components, 12 distinct parts.

QtyPartRefs
1
ADAFRUIT_HUZZAH
U1
1
bno055
U2
1
LPC1768
U3
1
SN65HVD232
U4
2
Conn_01x08
CON1, CON2
1
Conn_01x04
CON9
1
CON_ESC_W1
3
1
CON_ESC_W2
4
1
CON_ESC_W3
5
1
CON_ESC_D1
6
1
CON_ESC_D2
7
1
CON_ESC_D3
8

Triforce control design files

The KiCad project lives in the TeamTriforceUK/triforce-control-pcb repository on GitHub; these links point at the commit this page was built from.

Triforce control: common questions

What microcontroller does the Triforce control use?

The Triforce control is built around the ADAFRUIT_HUZZAH, from the ESP8266 family.

How big is the Triforce control PCB?

The Triforce control measures 75 × 86 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Triforce control?

13 components, from 12 distinct parts. The full bill of materials is listed on this page.

Where can I download the Triforce control design files?

From the TeamTriforceUK/triforce-control-pcb repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Triforce control design in my own project?

Yes, under the terms of its CERN-OHL-1.2 license, which TeamTriforceUK chose for the repository.

Can I test firmware for the Triforce control without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP8266 firmware against it before you order a PCB.

Similar boards