Orbit remapper
techmech-keeb·orbit-remapper·firmware/hid-remapper/custom-boards/v7/kicad/Remapper.kicad_pcb
About the Orbit remapper PCB
Orbit remapper is an open source RP2040/RP2350 PCB design by techmech-keeb, published on GitHub under the MIT license. It is a 2-layer board measuring 100 × 100 mm, with 124 components from 22 distinct parts.
Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the SL2.1A, MCP4651, TLV73333PDBV, W25Q16JVUXIQ and EL3H7-G. By type, the board carries 40 capacitors, 33 resistors, 29 ICs, 14 connectors, 2 crystals and 1 switch.
It belongs with the iot & wireless and keyboards designs in this gallery.
From the project
Desktop BLE-to-USB keyboard/mouse remapper on M5Dial (ESP32-S3), built on HID Remapper.
This variant of HID Remapper is meant to be a companion device for accessibility controllers like the PlayStation Access controller and the Xbox Adaptive Controller, especially the former, since it lacks its own USB inputs.
It has fourteen 3.5mm output ports, four of which are analog outputs. Two of the analog outputs can be used for analog sticks and the other two for analog triggers.

Main components on the Orbit remapper
Orbit remapper bill of materials (BOM)
124 components, 22 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SL2.1A | SOP-16_3.9x9.9mm_P1.27mm | U1 |
| 3 | MCP4651 | TSSOP-14 | U2, U6, U7 |
| 2 | RP2040 | RP2040-QFN-56 | U3, U103 |
| 1 | TLV73333PDBV | SOT-23-5 | U4 |
| 2 | W25Q16JVUXIQ | 8-USON | U5, U105 |
| 20 | EL3H7-G | SOP-4-1.27mm | U8, U9, U10, U11, U12, U13, U14, U15 +12 |
| 2 | CRYSTAL_GND24 Crystal_GND24 | Crystal_SMD_2520-4Pin_2.5x2.0mm | Y1, Y101 |
| 14 | AUDIOJACK4 AudioJack4 | C136687 | J1, J2, J3, J4, J5, J6, J7, J8 +6 |
| 1 | SW_Push | SW_SPST_B3U-1000P | SW102 |
| 4 | C2689978 USB_A | C2689978 | USB1, USB2, USB3, USB4 |
| 1 | HRO-TYPE-C-31-M-12 | HRO-TYPE-C-31-M-12-Assembly | USB101 |
| 23 | 100N 100n | C_0402_1005Metric | C1, C2, C3, C4, C5, C6, C7, C8 +15 |
| 6 | 1u | C_0402_1005Metric | C10, C13, C15, C16, C110, C113 |
| 4 | 15P 15p | C_0402_1005Metric | C18, C19, C118, C119 |
| 4 | 100U 100u | CP_EIA-3528-21_Kemet-B | C201, C202, C203, C204 |
| 3 | 10U 10u | C_0402_1005Metric | C205, C206, C207 |
| 20 | 470 | R_0402_1005Metric | R1, R2, R6, R8, R9, R10, R11, R12 +12 |
| 4 | 27 | R_0402_1005Metric | R3, R4, R103, R104 |
| 2 | 10K 10k | R_0402_1005Metric | R5, R105 |
| 3 | 1k | R_0402_1005Metric | R7, R106, R107 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 4.7K 4.7k | R_0402_1005Metric | R15, R16 |
| 2 | 5.1K 5.1k | R_0402_1005Metric | R101, R102 |
Orbit remapper design files
The KiCad project lives in the techmech-keeb/orbit-remapper repository on GitHub; these links point at the commit this page was built from.
Orbit remapper: common questions
What microcontroller does the Orbit remapper use?
The Orbit remapper is built around the RP2040, from the RP2040/RP2350 family.
How big is the Orbit remapper PCB?
The Orbit remapper measures 100 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Orbit remapper?
124 components, from 22 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Orbit remapper design files?
From the techmech-keeb/orbit-remapper repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Orbit remapper design in my own project?
Yes, under the terms of its MIT license, which techmech-keeb chose for the repository.
Can I test firmware for the Orbit remapper without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k