Line interface
Technariumas·smalsiukas·line-interface/line-interface.kicad_pcb
About the Line interface PCB
Line interface is an open source AVR/Arduino PCB design by Technariumas, published on GitHub under the Apache-2.0 license. It is a 2-layer board measuring 52 × 49 mm, with 31 components from 20 distinct parts.
Its main chip is the ATTINY441-SSU, from the AVR/Arduino family. Other key parts include the LM7805CT and SN65HVD72. By type, the board carries 9 capacitors, 8 resistors, 6 diodes, 3 ICs, 3 connectors and 1 transistor.
It belongs with the robotics & motion designs in this gallery.
From the project
The conversion of a forklift truck to a line following robot.
A file set related to conversion of BT C3E C4E forklift truck and Linde lifter to a line-following robot for an art installation of Robertas Narkus "Träger"

Main components on the Line interface
Line interface bill of materials (BOM)
31 components, 20 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ATTINY441-SSU | SOIC-14_3.9x8.7mm_Pitch1.27mm | IC1 |
| 1 | LM7805CT | TO-220_Horizontal | U1 |
| 1 | SN65HVD72 | SOIC-8_3.9x4.9mm_Pitch1.27mm | U2 |
| 1 | NDT2955 | TO-252-2Lead | Q1 |
| 1 | 16MHz | Crystal_HC49-SD_SMD | X1 |
| 1 | CONN_01X06 | Pin_Header_Straight_1x06_Pitch2.54mm | J1 |
| 1 | CONN_02X03 | Pin_Header_Straight_2x03_Pitch2.54mm | P1 |
| 1 | CONN_01X04 | JST_EH_B04B-EH-A_04x2.50mm_Straight | P2 |
| 1 | D_TVS_ALT | Diode-SMC_Handsoldering | D1 |
| 1 | 60V | D_SMB_Handsoldering | D2 |
| 1 | 15V | SOD-123 | D3 |
| 2 | GREEN | LED_0603 | D4, D6 |
| 1 | D | D_SOD-123 | D7 |
| 4 | 1u | C_0603 | C1, C4, C7, C9 |
| 2 | 1u | C_1210_HandSoldering | C2, C5 |
| 1 | CP1 | CP_Radial_D8.0mm_P3.50mm | C3 |
| 2 | 18p | C_0603 | C6, C8 |
| 1 | 10 | R_2512 | R1 |
| 6 | 10k | R_0603 | R2, R3, R4, R6, R9, R10 |
| 1 | 330 | R_0603 | R8 |
Line interface design files
The KiCad project lives in the Technariumas/smalsiukas repository on GitHub; these links point at the commit this page was built from.
Line interface: common questions
What microcontroller does the Line interface use?
The Line interface is built around the ATTINY441-SSU, from the AVR/Arduino family.
How big is the Line interface PCB?
The Line interface measures 52 × 49 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Line interface?
31 components, from 20 distinct parts. The full bill of materials is listed on this page.
Where can I download the Line interface design files?
From the Technariumas/smalsiukas repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Line interface design in my own project?
Yes, under the terms of its Apache-2.0 license, which Technariumas chose for the repository.
Can I test firmware for the Line interface without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
More boards in smalsiukas
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k