Controller

Technariumas·smalsiukas·controller/controller.kicad_pcb

Controller PCB layout, top view — open source AVR/Arduino board by Technariumas

About the Controller PCB

Controller is an open source AVR/Arduino PCB design by Technariumas, published on GitHub under the Apache-2.0 license. It is a 2-layer board measuring 240 × 125 mm, with 268 components from 48 distinct parts.

Its main chip is the ARDUINO_NANO, from the AVR/Arduino family. Other key parts include the LTV-814, ULN2801A, SN65HVD72, LM7805CT and SN74AHCT1G14DBVR. By type, the board carries 85 resistors, 61 diodes, 49 capacitors, 26 relays, 16 ICs and 12 connectors.

It belongs with the robotics & motion designs in this gallery.

From the project

The conversion of a forklift truck to a line following robot.

A file set related to conversion of BT C3E C4E forklift truck and Linde lifter to a line-following robot for an art installation of Robertas Narkus "Träger"

Controller, from the project README
From the project README

Main components on the Controller

LTV-814ULN2801ASN65HVD72LM7805CTSN74AHCT1G14DBVRVNH3SP3074HC595_WITH_PWRULN2803A

Controller bill of materials (BOM)

268 components, 48 distinct parts.

QtyPartRefs
6
LTV-814
U1, U4, U12, U13, U14, U15
2
ULN2801A
U2, U6
1
SN65HVD72
U3
1
LM7805CT
U5
1
SN74AHCT1G14DBVR
U7
1
VNH3SP30
U8
1
74HC595_WITH_PWR
U9
2
ULN2803A
U10, U11
1
LM7805CT
U16
4
Q_NMOS_GSD
Q1, Q2, Q4, Q9
3
Q_PMOS_GSD
Q3, Q5, Q6
1
Q_NMOS_GSD
Q7
1
NDT2955
Q8
4
CONN_01X10
J1, J2, J3, J4
3
CONN_01X02
J5, J23, J24
1
CONN_01X05
J6
1
CONN_01X06
J7
1
CONN_01X02
J8
1
CONN_01X04
J21
1
BATT
J22
Show 28 more
QtyPartRefs
2
Fuse
F1, F2
26
RELAY_SEPARATED
K1, K2, K3, K4, K5, K6, K7, K8 +18
7
40k
RV1, RV2, RV3, RV4, RV5, RV6, RV7
1
ARDUINO_NANO
SH1
26
D_ALT
D1, D2, D3, D4, D5, D6, D7, D8 +18
2
5V
D16, D36
7
16V
D28, D29, D52, D53, D56, D57, D58
18
LED_Small_ALT
D30, D31, D32, D33, D35, D37, D38, D39 +10
1
D_TVS_ALT
D34
5
D_TVS_ALT
D40, D41, D59, D60, D61
1
D
D54
1
GREEN
D55
30
C
C1, C2, C3, C4, C5, C6, C9, C10 +22
8
470u
C7, C15, C34, C37, C40, C41, C42, C43
6
1u
C8, C16, C36, C38, C44, C47
3
1u
C20, C35, C45
2
1u
C39, C48
15
100k
R1, R2, R10, R43, R44, R45, R46, R49 +7
5
1k
R3, R18, R57, R58, R68
1
3.6k
R4
48
R
R5, R6, R12, R13, R14, R15, R16, R17 +40
9
330
R7, R8, R9, R42, R47, R48, R65, R66 +1
1
0
R11
1
0R05
R20
2
169R
R54, R63
1
10k
R60
1
10
R61
1
330
R62

Controller design files

The KiCad project lives in the Technariumas/smalsiukas repository on GitHub; these links point at the commit this page was built from.

Controller: common questions

What microcontroller does the Controller use?

The Controller is built around the ARDUINO_NANO, from the AVR/Arduino family.

How big is the Controller PCB?

The Controller measures 240 × 125 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Controller?

268 components, from 48 distinct parts. The full bill of materials is listed on this page.

Where can I download the Controller design files?

From the Technariumas/smalsiukas repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Controller design in my own project?

Yes, under the terms of its Apache-2.0 license, which Technariumas chose for the repository.

Can I test firmware for the Controller without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in smalsiukas

Similar boards