Line sensor
Technariumas·smalsiukas·line-sensor/line-sensor.kicad_pcb
About the Line sensor PCB
Line sensor is an open source PCB design by Technariumas, published on GitHub under the Apache-2.0 license. It is a 2-layer board measuring 316 × 49 mm, with 62 components from 11 distinct parts.
Other key parts include the LM358, CNY70, LM339, 74LS165- and ULN2801A. By type, the board carries 32 resistors, 13 ICs, 5 capacitors and 3 connectors.
It belongs with the robotics & motion and sensors designs in this gallery.
From the project
The conversion of a forklift truck to a line following robot.
A file set related to conversion of BT C3E C4E forklift truck and Linde lifter to a line-following robot for an art installation of Robertas Narkus "Träger"

Main components on the Line sensor
Line sensor bill of materials (BOM)
62 components, 11 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM358 | SOIC-8_3.9x4.9mm_Pitch1.27mm | U1 |
| 8 | CNY70 | DIP-4_W7.62mm_LongPads | U2, U3, U4, U5, U6, U7, U8, U9 |
| 2 | LM339 | SOIC-14_3.9x8.7mm_Pitch1.27mm | U10, U11 |
| 1 | 74LS165- | SOIC-16_3.9x9.9mm_Pitch1.27mm | U12 |
| 1 | ULN2801A | SOIC-18W_7.5x11.6mm_Pitch1.27mm | U13 |
| 1 | CONN_01X10 | Multicomp_MC9A12-1034_2x05x2.54mm_Straight | J1 |
| 1 | IN | Pin_Header_Straight_1x06_Pitch2.54mm | J2 |
| 1 | OUT | Pin_Header_Straight_1x06_Pitch2.54mm | J3 |
| 9 | POT | Potentiometer_Trimmer_Bourns_3296P | RV1, RV2, RV3, RV4, RV5, RV6, RV7, RV8 +1 |
| 5 | C | C_0603_HandSoldering | C1, C2, C3, C4, C5 |
| 32 | R | R_0603_HandSoldering | R1, R2, R3, R4, R5, R6, R7, R8 +24 |
Line sensor design files
The KiCad project lives in the Technariumas/smalsiukas repository on GitHub; these links point at the commit this page was built from.
Line sensor: common questions
How big is the Line sensor PCB?
The Line sensor measures 316 × 49 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Line sensor?
62 components, from 11 distinct parts. The full bill of materials is listed on this page.
Where can I download the Line sensor design files?
From the Technariumas/smalsiukas repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Line sensor design in my own project?
Yes, under the terms of its Apache-2.0 license, which Technariumas chose for the repository.
More boards in smalsiukas
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kCube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1k