Linde steering
Technariumas·smalsiukas·controller/Linde_steering/Linde_steering.kicad_pcb
About the Linde steering PCB
Linde steering is an open source PCB design by Technariumas, published on GitHub under the Apache-2.0 license. It is a 2-layer board measuring 50 × 26.3 mm, with 21 components from 15 distinct parts.
Other key parts include the LTV-827 and TL072. By type, the board carries 11 resistors, 3 capacitors, 2 ICs, 2 connectors, 2 diodes and 1 transistor.
It belongs with the robotics & motion designs in this gallery.
From the project
The conversion of a forklift truck to a line following robot.
A file set related to conversion of BT C3E C4E forklift truck and Linde lifter to a line-following robot for an art installation of Robertas Narkus "Träger"

Main components on the Linde steering
Linde steering bill of materials (BOM)
21 components, 15 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LTV-827 | DIP-8_SMD | U1 |
| 1 | TL072 | SOIC-8-N | U2 |
| 1 | Q_NMOS_GSD | SOT-23 | Q1 |
| 1 | CONN_01X06 | Socket_Strip_Straight_1x06_Pitch2.54mm | P1 |
| 1 | CONN_01X06 | TerminalBlock_5.08-6pol | P2 |
| 2 | BZX84V006.8 | SOT-23 | D1, D2 |
| 2 | 10uF 35V | CP_Elec_5x5.7 | C1, C2 |
| 1 | C | R_1206_HandSoldering | C3 |
| 1 | 150 | R_0805_HandSoldering | R1 |
| 1 | 100k | R_0805_HandSoldering | R2 |
| 2 | 200 | R_0805_HandSoldering | R3, R4 |
| 2 | 1k | R_0805_HandSoldering | R5, R6 |
| 2 | 10k | R_0805_HandSoldering | R7, R8 |
| 2 | 2k | R_0805_HandSoldering | R9, R10 |
| 1 | 0R | R_0805_HandSoldering | R11 |
Linde steering design files
The KiCad project lives in the Technariumas/smalsiukas repository on GitHub; these links point at the commit this page was built from.
Linde steering: common questions
How big is the Linde steering PCB?
The Linde steering measures 50 × 26.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Linde steering?
21 components, from 15 distinct parts. The full bill of materials is listed on this page.
Where can I download the Linde steering design files?
From the Technariumas/smalsiukas repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Linde steering design in my own project?
Yes, under the terms of its Apache-2.0 license, which Technariumas chose for the repository.
More boards in smalsiukas
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kCube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1kTrollerv2
rene-dev
100 × 75 mm33 parts4LGPL-3.0979Powerstep
rene-dev
95.2 × 71.5 mm28 parts4LGPL-3.097911ua
rene-dev
57.3 × 19 mm26 parts2LGPL-3.0979Diff driver
rene-dev
32 × 22 mm14 parts2LGPL-3.0979