Assignment 3
TefoAM·MotorDriver-PiHat-Project·PiHAT files KiKad/Power Supply Circuit Files/assignment 3.kicad_pcb
About the Assignment 3 PCB
Assignment 3 is an open source PCB design by TefoAM, published on GitHub under the GPL-3.0 license. It is a 4-layer board measuring 52.1 × 38.1 mm, with 26 components from 19 distinct parts.
Other key parts include the OPAMP. By type, the board carries 9 resistors, 5 transistors, 4 capacitors, 3 diodes, 2 connectors and 1 IC.
It belongs with the robotics & motion and dev boards & breakouts designs in this gallery.
From the project
This repo contains files a Raspberry Pi Hat I designed. All the files made using LT Spice and Kicad, with which simulations to test the behaviors of the individual circuits were performed.
The PiHAT is a hardware board attached to a Raspberry Pi microcontroller. it is used to drive a motor using an external power source.
- boost convertor.asc - foldbackcircuit.asc - main power circuit.asc - zener.cir - H-Bridge circuit.asc - LED Circuit.asc
This repository contains all the files made using LT Spice and Kicad with which simulations to test the behaviors of the individual circuits were performed.
Main components on the Assignment 3
Assignment 3 bill of materials (BOM)
26 components, 19 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | OPAMP | R_0201_0603Metric | U1 |
| 1 | 2N3905 | TO-92_Inline | Q1 |
| 4 | 2N2219 | TO-39-3 | Q2, Q3, Q4, Q5 |
| 1 | Motor_voltage_input | PinSocket_1x02_P2.54mm_Vertical | J1 |
| 1 | Controller_input_voltage | PinSocket_1x02_P2.54mm_Vertical | J2 |
| 1 | 12V | PinHeader_1x02_P2.54mm_Vertical | power_supply_input1 |
| 3 | 1N5817 | D_0201_0603Metric | D1, D2, D3 |
| 1 | 330u | L_6.3x6.3_H3 | L1 |
| 1 | 10p | CP_Elec_4x3 | C1 |
| 1 | 0.1u | CP_Elec_4x3 | C2 |
| 1 | 10u | CP_Elec_4x3 | C3 |
| 1 | 100u | CP_Elec_4x3 | C4 |
| 3 | 1000 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R6 |
| 1 | 47000 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 1 | 470 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4 |
| 1 | 4 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5 |
| 1 | 5 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7 |
| 1 | 100000 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R8 |
| 1 | 8270 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R9 |
Assignment 3 design files
The KiCad project lives in the TefoAM/MotorDriver-PiHat-Project repository on GitHub; these links point at the commit this page was built from.
Assignment 3: common questions
How big is the Assignment 3 PCB?
The Assignment 3 measures 52.1 × 38.1 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Assignment 3?
26 components, from 19 distinct parts. The full bill of materials is listed on this page.
Where can I download the Assignment 3 design files?
From the TefoAM/MotorDriver-PiHat-Project repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Assignment 3 design in my own project?
Yes, under the terms of its GPL-3.0 license, which TefoAM chose for the repository.
More boards in MotorDriver-PiHat-Project
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2kBreakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2k