Sih kadha
TejasKadam001·sih-kadha·pcb/ikwath.kicad_pcb
About the Sih kadha PCB
Sih kadha is an open source ESP32 PCB design by TejasKadam001, published on GitHub. It is a 2-layer board measuring 150 × 104.9 mm, with 27 components from 23 distinct parts.
Its main chip is the ESP32-S3-DEVKITC-1U-N8R2, from the ESP32 family. Other key parts include the BNO055 and LORA_MODULE. By type, the board carries 6 connectors, 6 capacitors, 5 ICs, 3 diodes, 2 resistors and 1 module.
From the project
SIH26048: iKwath, a pod-based smart Kwatha (Kadha) maker that prepares a fresh, AFI/API-standardized decoction from coarse powder (yavakuta churna) on demand, in the shortest practical time, without altering the decoction's quality or yield Ministry of Ayush / All India Institute
SIH26048: iKwath, a pod-based smart Kwatha (Kadha) maker that prepares a fresh, AFI/API-standardized decoction from coarse powder (yavakuta churna) on demand, in the shortest practical time, without altering the decoction's quality or yield Ministry of Ayush / All India Institute of Ayurveda (AIIA) | Smart India Hackathon 2026 Team: MACH 2 Design philosophy: Classical Fidelity | Hardware-Enforced Safety | Measured Endpoints, Not Timers | Honest Project Status
Main components on the Sih kadha
Sih kadha bill of materials (BOM)
27 components, 23 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | BNO055 | MODULE_2472 | U1 |
| 2 | ~ | LM2596_buck_conv | U2, U3 |
| 1 | LORA_MODULE | SX1278 LoRa Module | U5 |
| 1 | ESP32-S3-DEVKITC-1U-N8R2 | XCVR_ESP32-S3-DEVKITC-1U-N8R2 | U6 |
| 1 | MS5611 | MS5611F | m1 |
| 1 | CAMERA MODULE | PinHeader_2x09_P2.54mm_Vertical | J1 |
| 1 | BATTERY | JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J2 |
| 1 | LiDAR module | JST_PH_B4B-PH-K_1x04_P2.00mm_Vertical | J3 |
| 1 | XT-60 | AMASS_XT60-M_1x02_P7.20mm_Vertical | J5 |
| 1 | SERVO_LEFT | JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J9 |
| 1 | SERVO_RIGHT | JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J11 |
| 1 | 220Ω | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | 220Ω |
| 1 | — | NEO_GPS | GPS1 |
| 1 | ~ | sd_card_module | SDMODULE1 |
| 1 | SW_Wuerth_450301014042 | SW_Slide-03_Wuerth-WS-SLTV_10x2.5x6.4_P2.54mm | SW1 |
| 1 | POWER LED | LED_D5.0mm | D1 |
| 1 | STATUS | LED_D5.0mm | D2 |
| 1 | CONNNECTED | LED_D5.0mm | D3 |
| 3 | 0.1µF | C_Rect_L7.2mm_W2.5mm_P5.00mm_FKS2_FKP2_MKS2_MKP2 | C1, C2, C5 |
| 2 | 220 | CP_Radial_D5.0mm_P2.50mm | C3, C6 |
Show 3 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 470 | CP_Radial_D5.0mm_P2.50mm | C4 |
| 1 | 3.3KΩ | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | 220Ω | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2 |
Sih kadha design files
The KiCad project lives in the TejasKadam001/sih-kadha repository on GitHub; these links point at the commit this page was built from.
- Layoutpcb/ikwath.kicad_pcb
- Schematicpcb/ikwath.kicad_sch
- BOMdocs/bom.md
Sih kadha: common questions
What microcontroller does the Sih kadha use?
The Sih kadha is built around the ESP32-S3-DEVKITC-1U-N8R2, from the ESP32 family.
How big is the Sih kadha PCB?
The Sih kadha measures 150 × 104.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Sih kadha?
27 components, from 23 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Sih kadha design files?
From the TejasKadam001/sih-kadha repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Sih kadha design in my own project?
The repository has no license, so all rights stay with TejasKadam001. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Sih kadha without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k