5 open source boards using the ESP32-S3-DEVKITC-1U-N8R2
Real designs built with the ESP32-S3-DEVKITC-1U-N8R2, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Micromouse
opatiny
110 × 110 mm35 parts2LCERN-OHL-P-2.015ESP32
4F5LCD
Code99it
155 × 78 mm49 parts2LMIT3ESP32
Sih kadha
TejasKadam001
150 × 104.9 mm27 parts2LNo license0ESP32
QPCR Controller Board
lehaihv
39.1 × 15.7 mm5 parts2LNo license0ESP32
Arm power connector
ICRS
86 × 82 mm9 parts2LNo license1
How designs wire the ESP32-S3-DEVKITC-1U-N8R2
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the ESP32-S3-DEVKITC-1U-N8R2 connects to, and the resistors, capacitors and other passives placed on it.
- The 3V3 pins is tied to 3.3V on 80% of them (not connected on 2).
- The RST pin is left unconnected on 4 of 5 designs.
- The 5V0 pin is tied to 5V on 3 of 5 designs.
- The GPIO38 pin is left unconnected on 3 of 5 designs (a signal on 2).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| 3V3pin J1_1, J1_2 | Connected to: 3.3V 80% · not connected 20% | — |
| RSTpin J1_3 | Connected to: Not connected 80% · VREG_RO 20% | — |
| 5V0pin J1_21 | Connected to: 5V 60% · not connected 20% · a signal 20% | — |
| GNDpin J1_22, J3_1, J3_21, J3_22 | Connected to: GND 100% | — |
| GPIO2pin J3_5 | Connected to: Signal 80% · not connected 20% |
|
| GPIO38pin J3_10 | Connected to: Not connected 60% · a signal 40% | — |
| GPIO37pin J3_11 | Connected to: Not connected 60% · a signal 40% | — |
| GPIO36pin J3_12 | Connected to: Not connected 60% · a signal 40% | — |
| GPIO35pin J3_13 | Connected to: Not connected 60% · a signal 40% | — |
| GPIO0pin J3_14 | Connected to: Not connected 60% · a signal 40% | — |
| GPIO45pin J3_15 | Connected to: Not connected 60% · a signal 40% | — |
| GPIO48pin J3_16 | Connected to: Not connected 60% · a signal 40% | — |
28 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Micromouse by opatiny, 4F5LCD by Code99it, Arm power connector by ICRS and QPCR Controller Board by lehaihv.
The ESP32-S3-DEVKITC-1U-N8R2 in open source designs
The gallery holds 5 open source boards using the ESP32-S3-DEVKITC-1U-N8R2 from 5 GitHub repositories; a typical one measures about 110 × 82 mm and carries around 27 components.
100% are two-layer designs, the rest use four layers or more, and 40% carry an open source license.
The most starred is Micromouse by opatiny.
Microcontrollers on boards using the ESP32-S3-DEVKITC-1U-N8R2
What boards using the ESP32-S3-DEVKITC-1U-N8R2 are built for
ESP32-S3-DEVKITC-1U-N8R2: common questions
Where can I find a ESP32-S3-DEVKITC-1U-N8R2 reference design?
Each of the 5 boards on this page is a real design using the ESP32-S3-DEVKITC-1U-N8R2. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the ESP32-S3-DEVKITC-1U-N8R2 3V3 pin connected?
The 3V3 pins is tied to 3.3V on 80% of them (not connected on 2). Counted from the KiCad layouts of 5 open source designs using the ESP32-S3-DEVKITC-1U-N8R2.
How is the ESP32-S3-DEVKITC-1U-N8R2 RST pin connected?
The RST pin is left unconnected on 4 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the ESP32-S3-DEVKITC-1U-N8R2.
How is the ESP32-S3-DEVKITC-1U-N8R2 5V0 pin connected?
The 5V0 pin is tied to 5V on 3 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the ESP32-S3-DEVKITC-1U-N8R2.
Which microcontrollers do boards using the ESP32-S3-DEVKITC-1U-N8R2 use?
Most are built on ESP32 (5).
How big is a typical board using the ESP32-S3-DEVKITC-1U-N8R2?
The median is 110 × 82 mm, and 100% are two-layer designs.
What is the most popular open source board using the ESP32-S3-DEVKITC-1U-N8R2?
By GitHub stars, Micromouse by opatiny, with 15 stars.
Can I simulate one of these boards using the ESP32-S3-DEVKITC-1U-N8R2 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.