2 open source boards using the usb_c_power
Real designs built with the usb_c_power, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
PowerCB
MartinWeigel
54 × 17.1 mm16 parts2LNo license1AVR/Arduino
Memory board
tensorway
100 × 100 mm53 parts2LNo license0
The usb_c_power in open source designs
The gallery holds 2 open source boards using the usb_c_power from 2 GitHub repositories; a typical one measures about 77 × 58.6 mm and carries around 35 components.
100% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is PowerCB by MartinWeigel.
Microcontrollers on boards using the usb_c_power
What boards using the usb_c_power are built for
usb_c_power: common questions
Where can I find a usb_c_power reference design?
Each of the 2 boards on this page is a real design using the usb_c_power. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the usb_c_power use?
Most are built on AVR/Arduino (1).
How big is a typical board using the usb_c_power?
The median is 77 × 58.6 mm, and 100% are two-layer designs.
What is the most popular open source board using the usb_c_power?
By GitHub stars, PowerCB by MartinWeigel, with 1 stars.
Can I simulate one of these boards using the usb_c_power before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.