Hush main
Terryzhao-dev·Hush·pcb/hush_main/hush_main.kicad_pcb
About the Hush main PCB
Hush main is an open source ESP32 PCB design by Terryzhao-dev, published on GitHub. It is a 4-layer board measuring 64 × 64 mm, with 52 components from 31 distinct parts.
Its main chip is the Espressif ESP32-WROOM-32UE-N4 (u.FL), from the ESP32 family. Other key parts include the TI BQ51050BRHLR, onsemi LC709203FQH-01TWG, TPS63020DSJR and LIS2DH12TR. By type, the board carries 26 capacitors, 14 resistors, 5 ICs, 4 connectors and 1 inductor.
It belongs with the iot & wireless and power & battery designs in this gallery.
From the project
Bluetooth dictation mic in an aluminium cup that keeps people nearby from hearing you (ESP32, KiCad, CadQuery)
KiCad 10 projects, generated from Python so every connection is reviewable as code. Open any .kicadpro in KiCad (installed at /Applications/KiCad`).
Each folder has design.py (the source), the .kicadsch, a schematic PDF, a BOM CSV and an erc.rpt. Values marked [TUNE] need bench measurement; [VERIFY]** needs a datasheet or supplier check before ordering.
build.sh uses KiCad's own Python plus a project-local Java runtime and Freerouting in work/tools/.
Main components on the Hush main
Hush main bill of materials (BOM)
52 components, 31 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TI BQ51050BRHLR BQ51050BRHLR | Texas_VQFN-RHL-20 | U1 |
| 1 | onsemi LC709203FQH-01TWG LC709203FQH-01TWG | WDFN-8-1EP_4x3mm_P0.65mm_EP2.4x1.8mm | U2 |
| 1 | TPS63020DSJR | TI_VSON-14_DSJ_3x4mm | U3 |
| 1 | Espressif ESP32-WROOM-32UE-N4 (u.FL) ESP32-WROOM-32UE-N4 | ESP32-WROOM-32UE | U4 |
| 1 | LIS2DH12TR | LGA-12_2x2mm_P0.5mm | U5 |
| 1 | TDK WR303050-15F5-G (leads soldered) RX coil WR303050-15F5-G | SolderWire-0.1sqmm_1x02_P3.6mm_D0.4mm_OD1mm | J1 |
| 1 | Jauch LP103450JH+PCM+PTC 2 wires Battery 1900 mAh (Jauch LP103450JH) | SolderWire-0.25sqmm_1x02_P4.2mm_D0.65mm_OD1.7mm | J2 |
| 1 | Program (Tag-Connect) | Tag-Connect_TC2030-IDC-NL_2x03_P1.27mm_Vertical | J3 |
| 1 | Hirose FH12-16S-0.5SH(55) FFC to ring board | Hirose_FH12-16S-0.5SH_1x16-1MP_P0.50mm_Horizontal | J6 |
| 2 | C77131 10k B3380 | R_0402_1005Metric | NTC1, NTC2 |
| 1 | e.g. Coilcraft XAL4020-152 [VERIFY] 1.5uH Isat>=3A | L_Abracon_ASPIAIG-F4020 | L1 |
| 1 | 100nF C0G 50V | C_0805_2012Metric | C1 |
| 1 | 47nF C0G 50V | C_0603_1608Metric | C2 |
| 1 | 39nF C0G 50V | C_0603_1608Metric | C3 |
| 1 | 2.2nF C0G 50V | C_0402_1005Metric | C4 |
| 2 | 10NF 10nF | C_0402_1005Metric | C5, C6 |
| 2 | C1532 22nF 50V | C_0402_1005Metric | C7, C8 |
| 2 | 470nF 25V | C_0603_1608Metric | C9, C10 |
| 4 | C15850 10uF 25V | C_0805_2012Metric | C11, C12, C17, C18 |
| 1 | C307331 100nF 50V | C_0402_1005Metric | C13 |
Show 11 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 1UF 1uF | C_0402_1005Metric | C14, C25 |
| 6 | 100NF 100nF | C_0402_1005Metric | C15, C16, C19, C22, C24, C26 |
| 3 | C45783 22uF 25V | C_0805_2012Metric | C20, C21, C23 |
| 1 | 430R | R_0402_1005Metric | R1 |
| 1 | 200R | R_0402_1005Metric | R2 |
| 1 | 20k DNP | R_0402_1005Metric | R3 |
| 1 | 2.4k | R_0402_1005Metric | R4 |
| 4 | 100K 100k | R_0402_1005Metric | R5, R7, R9, R14 |
| 3 | 10K 10k | R_0402_1005Metric | R6, R12, R13 |
| 1 | 560k | R_0402_1005Metric | R8 |
| 2 | 4.7K 4.7k | R_0402_1005Metric | R10, R11 |
Hush main design files
The KiCad project lives in the Terryzhao-dev/Hush repository on GitHub; these links point at the commit this page was built from.
Hush main: common questions
What microcontroller does the Hush main use?
The Hush main is built around the Espressif ESP32-WROOM-32UE-N4 (u.FL), from the ESP32 family.
How big is the Hush main PCB?
The Hush main measures 64 × 64 mm, has 4 copper layers and is 1 mm thick.
How many components are on the Hush main?
52 components, from 31 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Hush main design files?
From the Terryzhao-dev/Hush repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Hush main design in my own project?
The repository has no license, so all rights stay with Terryzhao-dev. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Hush main without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in Hush
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k