Soldered-Accelerometer gyroscope-LSM6DSO32TR-hardware design
test-gh-syncer2·Soldered-Accelerometer-gyroscope-LSM6DSO32TR-hardware-design·CAD/V1.0/Accelerometer_gyroscope_LSM6DSO32TR.kicad_pcb
About the Soldered-Accelerometer gyroscope-LSM6DSO32TR-hardware design PCB
Soldered-Accelerometer gyroscope-LSM6DSO32TR-hardware design is an open source PCB design by test-gh-syncer2, published on GitHub under the TAPR-OHL-1.0 license. It is a 2-layer board measuring 22 × 22 mm, with 23 components from 14 distinct parts.
Other key parts include the NMOS-DUAL, LSM6DSO32TR and SE5218. By type, the board carries 5 jumpers, 5 resistors, 4 relays, 4 capacitors and 3 ICs.
It belongs with the sensors designs in this gallery.
From the project
Hardware design, BOM, gerbers, 3D files and pinout for Accelerometer_gyroscope_LSM6DSO32TR designed by Soldered.
Find XXXXXXXX on our [web store](https://solde.red/ .
All Soldered hardware is designed in KiCAD, and repositories are organised in the following way:
- CAD folder - contains KiCAD files (Schematics, Board, Panel Board), organised by version. Change log lists all changes between different versions. - OUTPUTS - contains useful files, such as Bill of Materials (BOM), PDF of schematics, 3D .step file of the board and gerber files, organised by version.
Main components on the Soldered-Accelerometer gyroscope-LSM6DSO32TR-hardware design
Soldered-Accelerometer gyroscope-LSM6DSO32TR-hardware design bill of materials (BOM)
23 components, 14 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | NMOS-DUAL | SOT-363 | U1 |
| 1 | LSM6DSO32TR | LSM6DSO32TR | U2 |
| 1 | SE5218 | SOT-23-5 | U3 |
| 2 | HOLE_3.2MM HOLE_3.2mm | HOLE_3.2mm | H1, H2 |
| 2 | SMD_JUMPER_3_PAD_TRACE | SMD_JUMPER_3_PAD_TRACE | JP1, JP2 |
| 1 | SMD-JUMPER-CONNECTED_TRACE_NOSLODERMASK | SMD-JUMPER-CONNECTED_TRACE_NOSLODERMASK | JP3 |
| 1 | SMD_JUMPER | SMD_JUMPER | JP4 |
| 1 | JUMPER_3_RIGHT | SMD_JUMPER_3_PAD_CONNECTED_RIGHT | JP5 |
| 2 | easyC-SMD | easyC-connector | K1, K3 |
| 1 | HEADER_MALE_4X1 | HEADER_MALE_4X1 | K2 |
| 1 | HEADER_MALE_2X1 | HEADER_MALE_2X1 | K4 |
| 2 | 0.1UF 0.1uF | 0603C | C1, C2 |
| 2 | 2.2UF 2.2uF | 0603C | C3, C4 |
| 5 | 10K 10k | 0603R | R1, R2, R3, R4, R5 |
Soldered-Accelerometer gyroscope-LSM6DSO32TR-hardware design design files
The KiCad project lives in the test-gh-syncer2/Soldered-Accelerometer-gyroscope-LSM6DSO32TR-hardware-design repository on GitHub; these links point at the commit this page was built from.
Soldered-Accelerometer gyroscope-LSM6DSO32TR-hardware design: common questions
How big is the Soldered-Accelerometer gyroscope-LSM6DSO32TR-hardware design PCB?
The Soldered-Accelerometer gyroscope-LSM6DSO32TR-hardware design measures 22 × 22 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Soldered-Accelerometer gyroscope-LSM6DSO32TR-hardware design?
23 components, from 14 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Soldered-Accelerometer gyroscope-LSM6DSO32TR-hardware design design files?
From the test-gh-syncer2/Soldered-Accelerometer-gyroscope-LSM6DSO32TR-hardware-design repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Soldered-Accelerometer gyroscope-LSM6DSO32TR-hardware design design in my own project?
Yes, under the terms of its TAPR-OHL-1.0 license, which test-gh-syncer2 chose for the repository.
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kPots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956