Soldered-CAN-Transceiver-MCP2518-board hardware design
test-gh-syncer2·Soldered-CAN-Transceiver-MCP2518-board-hardware-design·CAD/V1.1.1/CAN_MCP2518FDT.kicad_pcb
About the Soldered-CAN-Transceiver-MCP2518-board hardware design
Soldered-CAN-Transceiver-MCP2518-board hardware design is an open source PCB design by test-gh-syncer2, published on GitHub under the TAPR-OHL-1.0 license. It is a 2-layer board measuring 22 × 38 mm, with 20 components from 15 distinct parts.
Other key parts include the SE5218, MCP2518FD and ATA6561-GAQW-N. By type, the board carries 6 capacitors, 3 ICs, 3 relays, 2 jumpers, 2 resistors and 1 crystal.
It belongs with the rf & radio and dev boards & breakouts designs in this gallery.
From the project
Hardware design, BOM, gerbers, 3D files and pinout for CAN-Transceiver-MCP2518-board designed by Soldered.
All Soldered hardware is designed in KiCAD, and repositories are organized in the following way:
- CAD folder - contains KiCAD files (Schematics, Board, Panel Board), organized by version. Change log lists all changes between versions. - OUTPUTS - contains useful files, such as Bill of Materials (BOM), PDF of schematics, 3D .step file of the board and gerber files, organized by version.
Main components on the Soldered-CAN-Transceiver-MCP2518-board hardware design
Soldered-CAN-Transceiver-MCP2518-board hardware design bill of materials (BOM)
20 components, 15 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SE5218 | SOT-23-5 | U1 |
| 1 | MCP2518FD | SOIC-14 | U2 |
| 1 | ATA6561-GAQW-N | SOIC−8 | U3 |
| 1 | 40MHZ 40MHz | KRISTAL_3225__4_PAD | X1 |
| 2 | HOLE_3.2MM HOLE_3.2mm | HOLE_3.2mm | H1, H2 |
| 1 | SMD_JUMPER | SMD_JUMPER | JP1 |
| 1 | SMD-JUMPER-CONNECTED_TRACE_SLODERMASK | SMD-JUMPER-CONNECTED_TRACE_SLODERMASK | JP2 |
| 2 | HEADER_MALE_6X1 | HEADER_MALE_6X1 | K1, K2 |
| 1 | TERMINAL_KF235-5.0-2P | TERMINAL_KF235-5.0-2P | K3 |
| 1 | purple | 0402LED | D1 |
| 2 | 22PF 22pF | 0603C | C1, C2 |
| 2 | 2.2UF 2.2uF | 0603C | C3, C5 |
| 2 | 0.1UF 0.1uF | 0603C | C4, C6 |
| 1 | 120R | 0603R | R1 |
| 1 | 2K2 2k2 | 0402R | R2 |
Soldered-CAN-Transceiver-MCP2518-board hardware design design files
The KiCad project lives in the test-gh-syncer2/Soldered-CAN-Transceiver-MCP2518-board-hardware-design repository on GitHub; these links point at the commit this page was built from.
Soldered-CAN-Transceiver-MCP2518-board hardware design: common questions
How big is the Soldered-CAN-Transceiver-MCP2518-board hardware design?
The Soldered-CAN-Transceiver-MCP2518-board hardware design measures 22 × 38 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Soldered-CAN-Transceiver-MCP2518-board hardware design?
20 components, from 15 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Soldered-CAN-Transceiver-MCP2518-board hardware design design files?
From the test-gh-syncer2/Soldered-CAN-Transceiver-MCP2518-board-hardware-design repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Soldered-CAN-Transceiver-MCP2518-board hardware design design in my own project?
Yes, under the terms of its TAPR-OHL-1.0 license, which test-gh-syncer2 chose for the repository.
Similar boards
Breakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kRj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979