4 open source boards using the MCP2518FD
Real designs built with the MCP2518FD, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Soldered-CAN-Transceiver-MCP2518-board hardware design
test-gh-syncer2
22 × 38 mm20 parts2LTAPR-OHL-1.02STM32
VCU CM4
NTURacingTeam
100 × 90 mm445 parts4LNo license0STM32
VCU CM5
NTURacingTeam
100 × 90 mm418 parts4LNo license0Raspberry Pi
DIY IMU RPIBASE
NTURacingTeam
60 × 65 mm73 parts4LNo license0
The MCP2518FD in open source designs
The gallery holds 4 open source boards using the MCP2518FD from 2 GitHub repositories; a typical one measures about 80 × 77.5 mm and carries around 246 components.
75% use four copper layers or more, and 25% carry an open source license.
The most starred is Soldered-CAN-Transceiver-MCP2518-board hardware design by test-gh-syncer2.
Microcontrollers on boards using the MCP2518FD
What boards using the MCP2518FD are built for
MCP2518FD: common questions
Where can I find a MCP2518FD reference design?
Each of the 4 boards on this page is a real design using the MCP2518FD. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the MCP2518FD use?
Most are built on STM32 (2) and Raspberry Pi (1).
How big is a typical board using the MCP2518FD?
The median is 80 × 77.5 mm, and 25% are two-layer designs.
What is the most popular open source board using the MCP2518FD?
By GitHub stars, Soldered-CAN-Transceiver-MCP2518-board hardware design by test-gh-syncer2, with 2 stars.
Can I simulate one of these boards using the MCP2518FD before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.