Soldered-Color and gesture sensor-APDS-9960-breakout hardware design
test-gh-syncer2·Soldered-Color-and-gesture-sensor-APDS-9960-breakout-hardware-design·CAD/V1.0.0/APDS9960_breakout.kicad_pcb
About the Soldered-Color and gesture sensor-APDS-9960-breakout hardware design
Soldered-Color and gesture sensor-APDS-9960-breakout hardware design is an open source PCB design by test-gh-syncer2, published on GitHub under the TAPR-OHL-1.0 license. It is a 2-layer board measuring 22 × 38 mm, with 24 components from 14 distinct parts.
Other key parts include the APDS-9960, NMOS-DUAL and SE5218. By type, the board carries 5 jumpers, 5 capacitors, 5 resistors, 4 relays and 3 ICs.
It belongs with the sensors and dev boards & breakouts designs in this gallery.
From the project
Hardware design, BOM, gerbers, 3D files and pinout for Color-and-gesture-sensor-APDS-9960-breakout designed by Soldered.
Find XXXXXXXX on our [web store](https://solde.red/SKU]. !!! TODO
All Soldered hardware is designed in KiCAD, and repositories are organized in the following way:
- CAD folder - contains KiCAD files (Schematics, Board, Panel Board), organized by version. Change log lists all changes between different versions. - OUTPUTS - contains useful files, such as Bill of Materials (BOM), PDF of schematics, 3D .step file of the board and gerber files, organized by version.
Main components on the Soldered-Color and gesture sensor-APDS-9960-breakout hardware design
Soldered-Color and gesture sensor-APDS-9960-breakout hardware design bill of materials (BOM)
24 components, 14 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | APDS-9960 | APDS-9960 | U1 |
| 1 | NMOS-DUAL | SOT-363 | U2 |
| 1 | SE5218 | SOT-23-5 | U3 |
| 2 | HOLE_3.2MM HOLE_3.2mm | HOLE_3.2mm | H1, H2 |
| 2 | SMD_JUMPER_3_PAD_TRACE | SMD_JUMPER_3_PAD_TRACE | JP1, JP2 |
| 2 | SMD-JUMPER-CONNECTED_TRACE_SLODERMASK | SMD-JUMPER-CONNECTED_TRACE_SLODERMASK | JP3, JP4 |
| 1 | SMD_JUMPER | SMD_JUMPER | JP5 |
| 2 | easyC-SMD | easyC-connector | K1, K3 |
| 1 | HEADER_MALE_4X1 | HEADER_MALE_4X1 | K2 |
| 1 | HEADER_MALE_3X1 | HEADER_MALE_3X1 | K4 |
| 2 | 1UF 1uF | 0603C | C1, C3 |
| 1 | 68UF 68uF | 1210C_tantal | C2 |
| 2 | 2.2UF 2.2uF | 0603C | C4, C5 |
| 5 | 10K 10k | 0603R | R1, R2, R3, R4, R5 |
Soldered-Color and gesture sensor-APDS-9960-breakout hardware design design files
The KiCad project lives in the test-gh-syncer2/Soldered-Color-and-gesture-sensor-APDS-9960-breakout-hardware-design repository on GitHub; these links point at the commit this page was built from.
Soldered-Color and gesture sensor-APDS-9960-breakout hardware design: common questions
How big is the Soldered-Color and gesture sensor-APDS-9960-breakout hardware design?
The Soldered-Color and gesture sensor-APDS-9960-breakout hardware design measures 22 × 38 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Soldered-Color and gesture sensor-APDS-9960-breakout hardware design?
24 components, from 14 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Soldered-Color and gesture sensor-APDS-9960-breakout hardware design design files?
From the test-gh-syncer2/Soldered-Color-and-gesture-sensor-APDS-9960-breakout-hardware-design repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Soldered-Color and gesture sensor-APDS-9960-breakout hardware design design in my own project?
Yes, under the terms of its TAPR-OHL-1.0 license, which test-gh-syncer2 chose for the repository.
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2k