15 open source boards using the APDS-9960
Real designs built with the APDS-9960, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
FPGA
Zynq
juliancoy
120 × 60 mm295 partsMIT75ESP32
Soldered Inkplate 6 MOTION
SolderedElectronics
144.4 × 107.8 mm313 parts2LTAPR-OHL-1.04Color---gesture sensor-APDS-9960-breakout hardware design
SolderedElectronics
22 × 38 mm24 parts2LTAPR-OHL-1.01RP2040/RP2350
Gesture ir controller
akmalbnazir
37.8 × 33.3 mm19 parts2LNo license1Panelized
unicab369
93.2 × 99.1 mm631 parts2LNo license0FPGA
NeuraCore
NeuraCoreTech
120 × 60 mm295 parts8LNo license0Nordic nRF
NRF dev board
EmielV2002
122.1 × 104.4 mm104 parts4LGPL-3.00ESP32
Aquarium Accent Light
donaldbell
248 × 21.4 mm51 parts2LCustom license0Color and gesture sensor-APDS-9960-breakout hardware design
SolderedElectronics
22 × 38 mm24 parts2LTAPR-OHL-1.00Soldered-Color and gesture sensor-APDS-9960-breakout hardware design
test-gh-syncer2
22 × 38 mm24 parts2LTAPR-OHL-1.00ESP32
Soldered Inkplate 6 MOTION panel
SolderedElectronics
144.4 × 221.6 mm313 parts2LTAPR-OHL-1.04Mess-Sense+USBC
unicab369
99.1 × 99.1 mm440 parts2LNo license0RISC-V
Sensor node
unicab369
43.8 × 48.8 mm17 parts2LNo license0AVR/Arduino
Embedduino
MAHESH-THILAK-K
67.5 × 82.7 mm46 parts2LApache-2.00ESP32
7-seg clock
zOnlyKroks
76.2 × 70.3 mm42 parts4LCC0-1.00
How designs wire the APDS-9960
Read from the KiCad layouts of 13 open source designs, one per repository: what each pin of the APDS-9960 connects to, and the resistors, capacitors and other passives placed on it.
- The LDR pin is left unconnected on 12 of 13 designs.
- The LED_K pin is left unconnected on 11 of 13 designs.
- The VDD pin has a decoupling capacitor on 8 of 13 designs, most often 1 µF (then 68 µF).
- The SDA pin has a pull-up to 3.3V on 7 of 13 designs, most often 10 kΩ (then 4.7 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| SDApin 1 | Connected to: NMOS-DUAL 23% |
|
| INTpin 2 | Connected to: The microcontroller 31% · not connected 31% |
|
| LDRpin 3 | Connected to: Not connected 92% | — |
| LED_Kpin 4 | Connected to: Not connected 85% | — |
| LED_Apin 5 | Connected to: 3.3V 62% · a signal 31% | — |
| GNDpin 6 | Connected to: GND 100% | — |
| SCLpin 7 | Connected to: NMOS-DUAL 23% |
|
| VDDpin 8 | Connected to: 3.3V 85% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ZynqPCB by juliancoy, Soldered Inkplate 6 MOTION by SolderedElectronics, Gesture ir controller by akmalbnazir and Color---gesture sensor-APDS-9960-breakout hardware design by SolderedElectronics.
The APDS-9960 in open source designs
The gallery holds 15 open source boards using the APDS-9960 from 13 GitHub repositories; a typical one measures about 93.2 × 60 mm and carries around 51 components.
79% are two-layer designs, the rest use four layers or more, and 60% carry an open source license.
The most starred is ZynqPCB by juliancoy.
Parts used alongside the APDS-9960
Microcontrollers on boards using the APDS-9960
What boards using the APDS-9960 are built for
APDS-9960: common questions
Where can I find a APDS-9960 reference design?
Each of the 15 boards on this page is a real design using the APDS-9960. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the APDS-9960 LDR pin connected?
The LDR pin is left unconnected on 12 of 13 designs. Counted from the KiCad layouts of 13 open source designs using the APDS-9960.
How is the APDS-9960 LED_K pin connected?
The LED_K pin is left unconnected on 11 of 13 designs. Counted from the KiCad layouts of 13 open source designs using the APDS-9960.
What decoupling capacitors do designs use on the APDS-9960 VDD pin?
The VDD pin has a decoupling capacitor on 8 of 13 designs, most often 1 µF (then 68 µF). Counted from the KiCad layouts of 13 open source designs using the APDS-9960.
What parts are used alongside the APDS-9960?
The NMOS-DUAL, SE5218, AMS1117-3.3, BH1750FVI-TR and LSM6DSLTR appear in the most repositories here.
Which microcontrollers do boards using the APDS-9960 use?
Most are built on ESP32 (4), FPGA (2), AVR/Arduino (1) and Nordic nRF (1).
How big is a typical board using the APDS-9960?
The median is 93.2 × 60 mm, and 79% are two-layer designs.
What is the most popular open source board using the APDS-9960?
By GitHub stars, ZynqPCB by juliancoy, with 75 stars.
Can I simulate one of these boards using the APDS-9960 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.