Soldered-Dasduino-CORE-hardware design

test-gh-syncer2·Soldered-Dasduino-CORE-hardware-design·CAD/V1.1.1/Dasduino CORE.kicad_pcb

Soldered-Dasduino-CORE-hardware design PCB layout, top view — open source AVR/Arduino board by test-gh-syncer2

About the Soldered-Dasduino-CORE-hardware design PCB

Soldered-Dasduino-CORE-hardware design is an open source AVR/Arduino PCB design by test-gh-syncer2, published on GitHub under the TAPR-OHL-1.0 license. It is a 2-layer board measuring 25.9 × 63 mm, with 57 components from 33 distinct parts.

Its main chip is the ATMEGA_328P, from the AVR/Arduino family. Other key parts include the CH340C, TPS7A2633DRVR, TP4056M and NMOS-DUAL. By type, the board carries 17 resistors, 13 capacitors, 7 diodes, 5 ICs, 5 relays and 3 jumpers.

From the project

Hardware design, BOM, gerbers, 3D files and pinout for Dasduino-CORE designed by Soldered.

All Soldered hardware is designed in KiCAD, and repositories are organized in the following way:

- CAD folder - contains KiCAD files (Schematics, Board, Panel Board), organized by version. Change log lists all changes between versions. - OUTPUTS - contains useful files, such as Bill of Materials (BOM), PDF of schematics, 3D .step file of the board and gerber files, organized by version.

Main components on the Soldered-Dasduino-CORE-hardware design

Soldered-Dasduino-CORE-hardware design bill of materials (BOM)

57 components, 33 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
CH340C
U1
1
TPS7A2633DRVR
U2
1
TP4056M
U3
1
ATMEGA_328P
U4
1
NMOS-DUAL
U5
1
PMOS-SOT-23-3
Q1
1
16MHZ
16MHz
X1
1
1206FUSE-500MA
1206FUSE-500mA
F1
2
HOLE_3.2MM
HOLE_3.2mm
H1, H2
1
SMD-JUMPER-CONNECTED_TRACE_SLODERMASK
JP1
2
SMD_JUMPER_3_PAD_TRACE
JP2, JP3
1
easyC-SMD
K1
1
U262-161N-4BVC11
K2
1
JST-2PIN-SMD
JST-2pin-SMD
K3
2
HEADER_MALE_15X1
K4, K5
2
YTSA007A0151803B
SW1, SW2
1
blue
D1
1
white
D2
1
purple
D3
1
WS2812B-2020
D4
Show 13 more
QtyPartRefs
1
red
D5
1
orange
D6
1
BAT20J
D7
2
0.1UF
0.1uF
C1, C2
4
2.2UF
2.2uF
C3, C5, C7, C8
5
100NF
100nF
C4, C6, C11, C12, C13
2
22PF
22pF
C9, C10
3
1k
R1, R2, R5
5
2K2
2k2
R3, R4, R6, R9, R12
2
5.1K
5.1k
R7, R8
5
10K
10k
R10, R13, R15, R16, R17
1
3k
R11
1
100K
100k
R14

Soldered-Dasduino-CORE-hardware design design files

The KiCad project lives in the test-gh-syncer2/Soldered-Dasduino-CORE-hardware-design repository on GitHub; these links point at the commit this page was built from.

Soldered-Dasduino-CORE-hardware design: common questions

What microcontroller does the Soldered-Dasduino-CORE-hardware design use?

The Soldered-Dasduino-CORE-hardware design is built around the ATMEGA_328P, from the AVR/Arduino family.

How big is the Soldered-Dasduino-CORE-hardware design PCB?

The Soldered-Dasduino-CORE-hardware design measures 25.9 × 63 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Soldered-Dasduino-CORE-hardware design?

57 components, from 33 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Soldered-Dasduino-CORE-hardware design design files?

From the test-gh-syncer2/Soldered-Dasduino-CORE-hardware-design repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Soldered-Dasduino-CORE-hardware design design in my own project?

Yes, under the terms of its TAPR-OHL-1.0 license, which test-gh-syncer2 chose for the repository.

Can I test firmware for the Soldered-Dasduino-CORE-hardware design without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Similar boards