2 open source boards using the ATMEGA_328P
Real designs built with the ATMEGA_328P, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
Dasduino-CORE-hardware design
SolderedElectronics
63 × 25.9 mm57 parts2LTAPR-OHL-1.02AVR/Arduino
Soldered-Dasduino-CORE-hardware design
test-gh-syncer2
25.9 × 63 mm57 parts2LTAPR-OHL-1.00
The ATMEGA_328P in open source designs
The gallery holds 2 open source boards using the ATMEGA_328P from 2 GitHub repositories; a typical one measures about 44.4 × 44.4 mm and carries around 57 components.
100% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is Dasduino-CORE-hardware design by SolderedElectronics.
Parts used alongside the ATMEGA_328P
Microcontrollers on boards using the ATMEGA_328P
What boards using the ATMEGA_328P are built for
ATMEGA_328P: common questions
Where can I find a ATMEGA_328P reference design?
Each of the 2 boards on this page is a real design using the ATMEGA_328P. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the ATMEGA_328P?
The CH340C, NMOS-DUAL, TP4056M and TPS7A2633DRVR appear in the most repositories here.
Which microcontrollers do boards using the ATMEGA_328P use?
Most are built on AVR/Arduino (2).
How big is a typical board using the ATMEGA_328P?
The median is 44.4 × 44.4 mm, and 100% are two-layer designs.
What is the most popular open source board using the ATMEGA_328P?
By GitHub stars, Dasduino-CORE-hardware design by SolderedElectronics, with 2 stars.
Can I simulate one of these boards using the ATMEGA_328P before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.