Soldered-Enviromental sensor-BME280-breakout hardware design

test-gh-syncer2·Soldered-Enviromental-sensor-BME280-breakout-hardware-design·CAD/V1.0.0/BME280_breakout.kicad_pcb

Soldered-Enviromental sensor-BME280-breakout hardware design layout, top view — open source board by test-gh-syncer2

About the Soldered-Enviromental sensor-BME280-breakout hardware design

Soldered-Enviromental sensor-BME280-breakout hardware design is an open source PCB design by test-gh-syncer2, published on GitHub under the TAPR-OHL-1.0 license. It is a 2-layer board measuring 22 × 22 mm, with 20 components from 12 distinct parts.

Other key parts include the NMOS-DUAL, BME280 and SE5218. By type, the board carries 4 jumpers, 4 capacitors, 4 resistors, 3 ICs and 3 relays.

It belongs with the sensors and dev boards & breakouts designs in this gallery.

From the project

Hardware design, BOM, gerbers, 3D files and pinout for Enviromental-sensor-BME280-breakout designed by Soldered.

Find XXXXXXXX on our [web store](https://solde.red/ .

All Soldered hardware is designed in KiCAD, and repositories are organised in the following way:

- CAD folder - contains KiCAD files (Schematics, Board, Panel Board), organised by version. Change log lists all changes between different versions. - OUTPUTS - contains useful files, such as Bill of Materials (BOM), PDF of schematics, 3D .step file of the board and gerber files, organised by version.

Main components on the Soldered-Enviromental sensor-BME280-breakout hardware design

Soldered-Enviromental sensor-BME280-breakout hardware design bill of materials (BOM)

20 components, 12 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
NMOS-DUAL
U1
1
BME280
U2
1
SE5218
U3
2
HOLE_3.2MM
HOLE_3.2mm
H1, H2
2
SMD_JUMPER_3_PAD_TRACE
JP1, JP2
1
SMD-JUMPER-CONNECTED_TRACE_SLODERMASK
JP3
1
SMD_JUMPER
JP4
2
easyC-SMD
K1, K3
1
HEADER_MALE_4X1
K2
2
0.1UF
0.1uF
C1, C2
2
2.2UF
2.2uF
C3, C4
4
10K
10k
R1, R2, R3, R4

Soldered-Enviromental sensor-BME280-breakout hardware design design files

The KiCad project lives in the test-gh-syncer2/Soldered-Enviromental-sensor-BME280-breakout-hardware-design repository on GitHub; these links point at the commit this page was built from.

Soldered-Enviromental sensor-BME280-breakout hardware design: common questions

How big is the Soldered-Enviromental sensor-BME280-breakout hardware design?

The Soldered-Enviromental sensor-BME280-breakout hardware design measures 22 × 22 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Soldered-Enviromental sensor-BME280-breakout hardware design?

20 components, from 12 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Soldered-Enviromental sensor-BME280-breakout hardware design design files?

From the test-gh-syncer2/Soldered-Enviromental-sensor-BME280-breakout-hardware-design repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Soldered-Enviromental sensor-BME280-breakout hardware design design in my own project?

Yes, under the terms of its TAPR-OHL-1.0 license, which test-gh-syncer2 chose for the repository.

Similar boards