Soldered-Li ion charger with protection hardware design
test-gh-syncer2·Soldered-Li-ion-charger-with-protection-hardware-design·CAD/V1.1.1/LI-ION_charger_with_protection.kicad_pcb
About the Soldered-Li ion charger with protection hardware design PCB
Soldered-Li ion charger with protection hardware design is an open source PCB design by test-gh-syncer2, published on GitHub under the TAPR-OHL-1.0 license. It is a 2-layer board measuring 22 × 38 mm, with 32 components from 20 distinct parts.
Other key parts include the TP4056M, DW01-G(SOT23-6) and FS8205A. By type, the board carries 9 relays, 8 resistors, 3 ICs, 3 jumpers, 3 capacitors and 2 diodes.
It belongs with the power & battery designs in this gallery.
From the project
Hardware design, BOM, gerbers, 3D files and pinout for Li-ion-charger-with-protection designed by Soldered.
Find XXXXXXXX on our [web store](https://solde.red/ .
All Soldered hardware is designed in KiCAD, and repositories are organised in the following way:
- CAD folder - contains KiCAD files (Schematics, Board, Panel Board), organised by version. Change log lists all changes between different versions. - OUTPUTS - contains useful files, such as Bill of Materials (BOM), PDF of schematics, 3D .step file of the board and gerber files, organised by version.
Main components on the Soldered-Li ion charger with protection hardware design
Soldered-Li ion charger with protection hardware design bill of materials (BOM)
32 components, 20 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TP4056M | TP4056M-MSOP8 | U1 |
| 1 | DW01-G(SOT23-6) | Sot23-6 | U2 |
| 1 | FS8205A | TSSOP8 | U3 |
| 4 | HOLE_3.2MM HOLE_3.2mm | HOLE_3.2mm | H1, H2, H3, H4 |
| 1 | SMD_JUMPER | SMD_JUMPER | JP1 |
| 1 | SMD-JUMPER-CONNECTED | SMD_JUMPER_CONNECTED | JP2 |
| 1 | SMD-JUMPER-CONNECTED_TRACE_SLODERMASK | SMD-JUMPER-CONNECTED_TRACE_SLODERMASK | JP3 |
| 1 | U262-161N-4BVC11 | U262-161N-4BVC11 | K1 |
| 7 | HEADER_MALE_1X1 | HEADER_MALE_1X1 | K2, K3, K4, K5, K6, K8, K9 |
| 1 | JST-2PIN-SMD JST-2pin-SMD | JST-2pin-SMD | K7 |
| 1 | purple | 0402LED | D1 |
| 1 | red | 0402LED | D2 |
| 2 | 2.2UF 2.2uF | 0603C | C1, C2 |
| 1 | 0.1UF 0.1uF | 0603C | C3 |
| 2 | 5.1K 5.1k | 0603R | R1, R2 |
| 2 | 2K2 2k2 | 0402R | R3, R6 |
| 1 | 4.7K 4.7k | 0603R | R4 |
| 1 | 2K49 2k49 | 0603R | R5 |
| 1 | 1k | 0603R | R7 |
| 1 | 100R | 0603R | R8 |
Soldered-Li ion charger with protection hardware design design files
The KiCad project lives in the test-gh-syncer2/Soldered-Li-ion-charger-with-protection-hardware-design repository on GitHub; these links point at the commit this page was built from.
Soldered-Li ion charger with protection hardware design: common questions
How big is the Soldered-Li ion charger with protection hardware design PCB?
The Soldered-Li ion charger with protection hardware design measures 22 × 38 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Soldered-Li ion charger with protection hardware design?
32 components, from 20 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Soldered-Li ion charger with protection hardware design design files?
From the test-gh-syncer2/Soldered-Li-ion-charger-with-protection-hardware-design repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Soldered-Li ion charger with protection hardware design design in my own project?
Yes, under the terms of its TAPR-OHL-1.0 license, which test-gh-syncer2 chose for the repository.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k