43 open source boards using the FS8205A
Real designs built with the FS8205A, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ZC95 MKII
CrashOverride85
191.5 × 76 mm319 parts2LGPL-3.0115Main
Xii-Labs
81.6 × 134.5 mm33 parts4LCERN-OHL-S-2.0102Main
Xenii1642
81.6 × 134.5 mm33 parts4LCERN-OHL-S-2.047Joule Chief
fishPointer
84 × 98 mm90 parts2LMIT25ESP32
Tuxmini v03
tux-friend
32 × 32 mm78 parts2LGPL-3.018Raspberry Pi
PiUPS
diminDDL
87.4 × 56 mm110 parts2LCERN-OHL-W-2.015YNXT-WM01
RJSDevel
87.6 × 35.6 mm39 parts2LGPL-3.09AVR/Arduino
Smart penetrometer v0.4.0
ARTS-Laboratory
33 × 74.9 mm44 parts2LCC-BY-SA-4.061S-Li-Ion battery protection hardware design
SolderedElectronics
22 × 22 mm14 parts2LTAPR-OHL-1.06Meshphone
DerRKDCB
60 × 80 mm72 parts2LNo license5ESP32
Esp32-wifi ble weighing scale
IoTReady
81.2 × 40 mm57 parts2LNo license5Li ion charger with protection
SolderedElectronics
38 × 22 mm32 parts2LTAPR-OHL-1.05Omega2-Berrydock
berryelectronics
50 × 50 mm86 parts2LNo license4ESP32
Bramble
justinlindh
96 × 50 mm84 parts2LMIT2AVR/Arduino
Chaos papagali
Pakequis
49.4 × 43.7 mm36 parts2LMIT2Lipo-Charger and-3.3v-Regulator
stuenkels
14.1 × 33.3 mm21 parts2LNo license2ESP32
ESP32 LORA Chat
jharvey
121.9 × 101.6 mm222 parts4LGPL-3.01ESP32
Dancing forest
sequoia-hope
322.5 × 183.5 mm216 parts4LCustom license1ESP32
Iguana
iowlabs
80 × 50 mm112 parts2LNo license1Whole
Benedikt3141
109 × 55.5 mm83 parts2LMIT1ESP32
Skimmer-Detector-PRO
planmarks
84.2 × 49.8 mm65 parts2LNo license1ESP32
Feniks
marijn1606
91 × 22 mm52 parts2LNo license1AVR/Arduino
Camplight
codingkatty
76.1 × 25.4 mm36 parts4LMIT1ESP32
Marvin
norahueppi
73.1 × 86.8 mm131 parts4LNo license0Rgb ring
emmanuelprakash177-gi
84 × 84 mm126 parts2LNo license0ESP32
AuraForge-50X
RaviKachhwaha
100 × 80 mm83 parts4LNo license0STM32
Alacer-1
tomatencode
50 × 40 mm79 parts4LNo license0Echometer
wzwqoo
36.6 × 100 mm74 parts4LNo license0ESP32
Flex smart card
kamaljavvadi16-alt
50 × 94.5 mm62 parts4LNo license0ESP32
Alarm clock
Carabouille
100 × 80 mm59 parts2LNo license0ESP32
Trackball
mornepousse
52 × 72.1 mm51 parts2LNo license0ESP32
Tfg hardware
alcaaron
74.5 × 89.8 mm48 parts2LNo license0RP2040/RP2350
Haptic bracelet
plerros
21.3 × 52.5 mm47 parts2LGPL-3.00ESP32
Autofeedermod
wabolabs
56 × 54 mm39 parts4LCERN-OHL-W-2.00Soldered-Li ion charger with protection hardware design
test-gh-syncer2
22 × 38 mm32 parts2LTAPR-OHL-1.00Tp4056-Li po charger module
MohamedHassanExp
21 × 25.2 mm26 parts2LMIT0
How designs wire the FS8205A
Read from the KiCad layouts of 38 open source designs, one per repository: what each pin of the FS8205A connects to, and the resistors, capacitors and other passives placed on it.
- The S1 pins have a series capacitor on 24 of 38 designs, most often 100 nF (then 1 µF).
- The D12 pin is left unconnected on 19 of 19 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| S1pin 1, 2, 3 | Connected to: A connector 20% · not connected 32% · GND 31% |
|
| D12pin 8 | Connected to: Not connected 100% | — |
3 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ZC95 MKII by CrashOverride85, Main PCB by Xii-Labs, Main PCB by Xenii1642 and Joule Thief by fishPointer.
The FS8205A in open source designs
The gallery holds 43 open source boards using the FS8205A from 38 GitHub repositories; a typical one measures about 76.1 × 52.5 mm and carries around 52 components.
72% are two-layer designs, the rest use four layers or more, and 53% carry an open source license.
The most starred is ZC95 MKII by CrashOverride85.
Parts used alongside the FS8205A
Microcontrollers on boards using the FS8205A
What boards using the FS8205A are built for
FS8205A: common questions
Where can I find a FS8205A reference design?
Each of the 43 boards on this page is a real design using the FS8205A. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the FS8205A S1 pin connected?
The S1 pins have a series capacitor on 24 of 38 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 38 open source designs using the FS8205A.
How is the FS8205A D12 pin connected?
The D12 pin is left unconnected on 19 of 19 designs. Counted from the KiCad layouts of 38 open source designs using the FS8205A.
What parts are used alongside the FS8205A?
The DW01A, TP4056, DW01, MT3608 and TP4056-42-ESOP8 appear in the most repositories here.
Which microcontrollers do boards using the FS8205A use?
Most are built on ESP32 (17), AVR/Arduino (3), Raspberry Pi (1) and RP2040/RP2350 (1).
How big is a typical board using the FS8205A?
The median is 76.1 × 52.5 mm, and 72% are two-layer designs.
What is the most popular open source board using the FS8205A?
By GitHub stars, ZC95 MKII by CrashOverride85, with 115 stars.
Can I simulate one of these boards using the FS8205A before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.