LM393 breakout
test-gh-syncer2·Soldered-Simple-sensor-hardware-design·CAD/V1.0.0/LM393_breakout.kicad_pcb
About the LM393 breakout
LM393 breakout is an open source PCB design by test-gh-syncer2, published on GitHub under the TAPR-OHL-1.0 license. It is a 2-layer board measuring 22 × 22 mm, with 13 components from 10 distinct parts.
Other key parts include the LM393. By type, the board carries 4 resistors, 3 relays, 2 capacitors, 1 IC and 1 diode.
It belongs with the sensors and dev boards & breakouts designs in this gallery.
From the project
Hardware design, BOM, gerbers, 3D files and pinout for Simple_sensor designed by Soldered.
All Soldered hardware is designed in KiCAD, and repositories are organized in the following way:
- CAD folder - contains KiCAD files (Schematics, Board, Panel Board), organized by version. Change log lists all changes between versions. - OUTPUTS - contains useful files, such as Bill of Materials (BOM), PDF of schematics, 3D .step file of the board and gerber files, organized by version.
Main components on the LM393 breakout
LM393 breakout bill of materials (BOM)
13 components, 10 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM393 | SOIC−8 | U1 |
| 2 | HOLE_3.2MM HOLE_3.2mm | HOLE_3.2mm | H1, H2 |
| 1 | HEADER_MALE_2X1 | HEADER_MALE_2X1 | K1 |
| 1 | HEADER_MALE_4X1 | HEADER_MALE_4X1 | K2 |
| 1 | JST-SH_2PIN_1MM_C145954 JST-SH_2pin_1mm_C145954 | JST-SH_2pin_1mm_C145954 | K3 |
| 1 | purple | 0402LED | D1 |
| 2 | 0.1UF 0.1uF | 0603C | C1, C2 |
| 2 | 10K 10k | 0603R | R1, R2 |
| 1 | 2K2 1k | 0402R | R3 |
| 1 | TC33X-2-103E tc33x-2-103e | tc33x-2-103e | R4 |
LM393 breakout design files
The KiCad project lives in the test-gh-syncer2/Soldered-Simple-sensor-hardware-design repository on GitHub; these links point at the commit this page was built from.
LM393 breakout: common questions
How big is the LM393 breakout?
The LM393 breakout measures 22 × 22 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the LM393 breakout?
13 components, from 10 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the LM393 breakout design files?
From the test-gh-syncer2/Soldered-Simple-sensor-hardware-design repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the LM393 breakout design in my own project?
Yes, under the terms of its TAPR-OHL-1.0 license, which test-gh-syncer2 chose for the repository.
More boards in Soldered-Simple-sensor-hardware-design
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2k