Simple sensor

test-gh-syncer2·Soldered-Simple-sensor-hardware-design·CAD/V1.1.1/Simple_sensor.kicad_pcb

Simple sensor PCB layout, top view — open source board by test-gh-syncer2

About the Simple sensor PCB

Simple sensor is an open source PCB design by test-gh-syncer2, published on GitHub under the TAPR-OHL-1.0 license. It is a 2-layer board measuring 22 × 22 mm, with 13 components from 10 distinct parts.

Other key parts include the LM393. By type, the board carries 4 resistors, 3 relays, 2 capacitors, 1 IC and 1 diode.

It belongs with the sensors designs in this gallery.

From the project

Hardware design, BOM, gerbers, 3D files and pinout for Simple_sensor designed by Soldered.

All Soldered hardware is designed in KiCAD, and repositories are organized in the following way:

- CAD folder - contains KiCAD files (Schematics, Board, Panel Board), organized by version. Change log lists all changes between versions. - OUTPUTS - contains useful files, such as Bill of Materials (BOM), PDF of schematics, 3D .step file of the board and gerber files, organized by version.

Main components on the Simple sensor

Simple sensor bill of materials (BOM)

13 components, 10 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
LM393
U1
2
HOLE_3.2MM
HOLE_3.2mm
H1, H2
1
HEADER_MALE_2X1
K1
1
HEADER_MALE_4X1
K2
1
JST-SH_2PIN_1MM_C145954
JST-SH_2pin_1mm_C145954
K3
1
purple
D1
2
0.1UF
0.1uF
C1, C2
2
10K
10k
R1, R2
1
2K2
2k2
R3
1
TC33X-2-103E
tc33x-2-103e
R4

Simple sensor design files

The KiCad project lives in the test-gh-syncer2/Soldered-Simple-sensor-hardware-design repository on GitHub; these links point at the commit this page was built from.

Simple sensor: common questions

How big is the Simple sensor PCB?

The Simple sensor measures 22 × 22 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Simple sensor?

13 components, from 10 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Simple sensor design files?

From the test-gh-syncer2/Soldered-Simple-sensor-hardware-design repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Simple sensor design in my own project?

Yes, under the terms of its TAPR-OHL-1.0 license, which test-gh-syncer2 chose for the repository.

More boards in Soldered-Simple-sensor-hardware-design

Similar boards