Badascule bridge
teste80·badascule-bridge·board/midi_trs_switcher.kicad_pcb
About the Badascule bridge PCB
Badascule bridge is an open source ESP32 PCB design by teste80, published on GitHub under the CC-BY-NC-4.0 license. It is a 2-layer board measuring 80 × 50 mm, with 28 components from 12 distinct parts.
Its main chip is the XIAO-ESP32-S3-SMD, from the ESP32 family. Other key parts include the G3VM-61VY2 and H11L1. By type, the board carries 14 resistors, 6 ICs, 5 diodes, 2 connectors and 1 capacitor.
It belongs with the audio and iot & wireless designs in this gallery.
From the project
midi to TRS converter
A small, USB-powered MIDI-to-dual-TRS switcher that receives MIDI over a 5-pin DIN input and switches the tip and ring contacts of two TRS jacks. It is intended for equipment that accepts external contact-closure controls on TRS connectors. The switching logic is implemented in firmware on a Seeed Studio XIAO ESP32-S3; the schematic describes the hardware, not a fixed MIDI message map.
Main components on the Badascule bridge
Badascule bridge bill of materials (BOM)
28 components, 12 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | G3VM-61VY2 | Package_SO__SOP-4_3.8x4.1mm_P2.54mm_dfcff26fbc | U1, U3, U4, U5 |
| 1 | XIAO-ESP32-S3-SMD | Seeed_Studio_XIAO_Series_Library__XIAO-ESP32-S3-DIP_e509388080 | U2 |
| 1 | H11L1 | Package_DIP__DIP-6_W7.62mm_be17521b56 | U6 |
| 2 | NMJ6HFD3 | Connector_Audio__Jack_6.35mm_Neutrik_NMJ6HFD3_Horizontal_bdcec20657 | J1, J2 |
| 1 | 1N4148 | Diode_THT__D_DO-35_SOD27_P7.62mm_Horizontal_e9cf4a1726 | D1 |
| 4 | LED | Connector_Molex__Molex_KK-254_AE-6410-02A_1x02_P2.54mm_Vertical_3f03d068ee | D2, D3, D4, D5 |
| 1 | 100NF 100nF | Capacitor_THT__C_Disc_D5.0mm_W2.5mm_P5.00mm_0d7f7f987d | C1 |
| 1 | 220R | Resistor_THT__R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal_485ec1927a | R1 |
| 1 | 470R | Resistor_THT__R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal_485ec1927a | R2 |
| 4 | 1K5 | Resistor_THT__R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal_485ec1927a | R3, R4, R5, R6 |
| 4 | 390R | Resistor_THT__R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal_485ec1927a | R7, R10, R11, R12 |
| 4 | 100K | Resistor_THT__R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal_485ec1927a | R8, R9, R13, R14 |
Badascule bridge design files
The KiCad project lives in the teste80/badascule-bridge repository on GitHub; these links point at the commit this page was built from.
Badascule bridge: common questions
What microcontroller does the Badascule bridge use?
The Badascule bridge is built around the XIAO-ESP32-S3-SMD, from the ESP32 family.
How big is the Badascule bridge PCB?
The Badascule bridge measures 80 × 50 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Badascule bridge?
28 components, from 12 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Badascule bridge design files?
From the teste80/badascule-bridge repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Badascule bridge design in my own project?
It is published under CC-BY-NC-4.0, which limits how it may be reused; read the license before building on it.
Can I test firmware for the Badascule bridge without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k